No announcement yet.

running stereo audio to rf cd changer input

  • Filter
  • Time
  • Show
Clear All
new posts

  • running stereo audio to rf cd changer input

    I'm trying to wire my laptop's stereo output into the cd changer input of my rfx8220. The wiring for this connector is as follows:

    1 (R) CH
    2 CD ON
    3 BUS
    4 B+
    5 M. Ground
    6 NC
    7 (L) CH
    8 A. Ground

    I have tried wiring directly into the l/r channels, but the hu recognizes that there's no cd changer connected and switches to fm. Does anyone know what I might have to do to trick this into accepting my audio input? I currently am using an fm transmitter, but the quality is pretty bad, especially since there's a fairly powerful radio station at 88.5, and it only goes from 88.1 to 88.7. Also, this stereo can work with either the rfx8810 or rfxmp3.8 cd changer (neither of which I can find manuals on, and i don't own either one). And just to clarify, wiring/sodiering doesn't scare me in the least, I'm a (first year) computer engineering major

    edit: okay, this probably should have gone in the newbies section....