Announcement

Collapse
No announcement yet.

P1900 with P5V

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • P1900 with P5V

    Hi Mike,

    Earlier on you put up the configurations for P5VJumpers for the P5V
    to act as a 5Vs and a the secondary to be 5Vs too. So for Jumper 2, should i connect it to 5Vs?


    Also another question, according to the diagram which you attached before the site went down, the P5VJumpers.jpg,
    it states USE P5V JUMPER BETWEEN PIN 2 & 4 , LEAVE PIN 5 & 6 OPEN, USE EXISTING JUMPER BETWEEN PIN 1 & 3.
    Do i need any additional power input for the P5V or will it draw power on its own from pin 2 & 4 of jumper 5 ?

    Please let me know,
    Thanks a million

  • #2
    So for Jumper 2, should i connect it to 5Vs?
    If you are referring to JP2 (Secondary Output Voltage), yes, you must jumper JP2 for +5V if you want the Secondar Ouput to be +5V.
    Do i need any additional power input for the P5V or will it draw power on its own from pin 2 & 4 of jumper 5 ?
    No, the P5V will get its input from JP5 pins 2&4
    Mike H
    CarNetix
    www.carnetix.com
    mikeh@carnetix.com

    Comment

    Working...
    X