Announcement

Collapse
No announcement yet.

GMLAN 4 bus network tool

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • GMLAN 4 bus network tool

    Hi Guys

    Can anyone recommend an analyzer tool that can read the latest GM data networks? The new cars have four CAN lines, SWCAN MSCAN and 2x HSCAN.

    I need something that can ideally listen to all of the above and that is capable to transmit data too.

    Any ideas?
    Thanks

  • #2
    There are a couple of threads on people developing software to read the canbus and manipulate the data. I'm using an arduino with canbus shield to interface with the can us in my Touareg. The arduino + canbus is not a buy and implement item. There's programing involved to make it do what you want. I remember running across a post that listed a USB canbus device that worked out of the box more or less. I'll see if I can find that post.

    Comment


    • #3
      thanks for your help.

      I dont have a clue when it comes to programming software so this will be a bit of a learning curve for me.

      My aim in the end is to try and find someone who can help me build my own controller that i can leave in place to send out CAN frames when certain events happen on the bus.

      Thanks

      Comment


      • #4
        Yeah. The neoVI from Intrepid Control Systems (intrepidcs.com).

        Its what GM uses.. (and me).

        Its pretty Rad.
        Hack your car's CAN BUS at www.canbushack.com

        Comment


        • #5
          Originally posted by chewwtoy View Post
          Yeah. The neoVI from Intrepid Control Systems (intrepidcs.com).

          Its what GM uses.. (and me).

          Its pretty Rad.
          and expensive :P.
          Former author of LinuxICE, nghost, nobdy.
          Current author of Automotive Message Broker (AMB).
          Works on Tizen IVI. Does not represent anyone or anything but himself.

          Comment


          • #6
            HOW MUCH!!

            Would this allow me to read the calibration files sent to the ECU's?

            Comment


            • #7
              Originally posted by GMLAN View Post
              HOW MUCH!!

              Would this allow me to read the calibration files sent to the ECU's?
              It will let you see EVERYTHING.. everything.. ALL ..

              E V E R Y T H I N G...

              and yup its not cheap.. but is that what you want? Something cheap?

              Sometimes you have to pay for a good tool..
              Hack your car's CAN BUS at www.canbushack.com

              Comment

              Working...
              X