Announcement

Collapse
No announcement yet.

Able to communicate with ELM327 but unable to connect to the car

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Able to communicate with ELM327 but unable to connect to the car

    Hey everyone,

    Currently im doing a project to fetch the info from the car by OBD command via ELM327 with arduino Mega. My current stage is, I am able to communicate with ELM with the AT command yet when i connect it to the car and try to send the OBD command like "0100, 0101, 0105", all the response i got is error. The protocol used by my car is ISO 15765-4 CAN.

    first i set the protocol to automatic:
    >ATSP0
    OK
    >ATDP
    Automatic
    >0100
    yyyyyyyyyyyyyyUNABLE TO CONNECT
    >0105
    yyyyyyUNABLE TO CONNECT

    then i try to set the protocol to 6 (ISO 15765 CAN)
    >ATSP6
    OK
    >ATDP
    ISO 15765 CAN
    >0100
    CAN ERROR
    >0105
    CAN ERROR

    The hardware connection is same as the one shown in ELM datasheet, hence i suppose theres no problem in the hardware. Does anyone know whats going on? it shouldn be the software problem as it able to fetch the reply of AT command. (the buffer of the response frm elm is set to 256 bits). I'm really stuck now.

    thanks in advance for ur reply much appreciated!!
Working...
X