Announcement

Collapse
No announcement yet.

ELM327 Device Simulation?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ELM327 Device Simulation?

    All,

    I've overcome the issue I mentioned in my other post, and I'm able to connect to my device. However, the app I've been working on can connect to my actual WiFi ELM327 device and read data, but it won't from OBDSIM. All I get from the log is this:
    22:01:11(in): 'AT WS
    '
    22:01:12(out): '
    '
    22:01:12(out): 'ELM327 v1.3a OBDGPSLogger'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): 'AT E0
    '
    22:01:12(out): '
    '
    22:01:12(out): 'OK'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): 'AT I
    '
    22:01:12(out): '
    '
    22:01:12(out): 'ELM327 v1.3a OBDGPSLogger'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): '01 00
    '
    22:01:12(out): '
    '
    22:01:12(out): '41 00 88 19 80 00'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): '01 00
    '
    22:01:12(out): '
    '
    22:01:12(out): '41 00 88 19 80 00'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): '01 00
    '
    22:01:12(out): '
    '
    22:01:12(out): '41 00 88 19 80 00'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): '01 00
    '
    22:01:12(out): '
    '
    22:01:12(out): '41 00 88 19 80 00'
    22:01:12(out): '
    '
    22:01:12(out): '>'
    22:01:12(in): '01 00
    '
    22:01:12(out): '
    '
    22:01:12(out): '41 00 88 19 80 00'
    22:01:12(out): '
    '
    22:01:13(out): '>'
    22:01:13(in): '01 00
    '
    22:01:13(out): '
    '
    22:01:13(out): '41 00 88 19 80 00'
    22:01:13(out): '
    '
    22:01:13(out): '>'
    22:01:13(in): '01 00
    '
    22:01:13(out): '

    It's clearly just repeating that pattern, but I'm not sure why my app won't talk to it when it's able to talk to my other WiFi device? In addition, I've tried a few other OBD reader apps and they have the same result, some even crash and never read anything. Any thoughts?

  • #2
    41 00 88 19 80 00 is showing bit mapped version of the PIDs it support. so it is giving same response to any device which polls 0100

    Comment

    Working...
    X