Announcement

Collapse
No announcement yet.

Help!!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help!!!

    Ive got all my screen in place all sanded and its almost perfect, except a couple of little pin sized holes and scraped, What can i do to get rid of these or do i just have to keep repeating the processes of sanding, filling, sanding, filling etc. until they dissappear. Im using normal body filler at the min

    ......Also im in uk so theres no Bondo here

    Thanks

  • #2
    get yourself into paint shop and buy a primer paint in a preasurised can. spray 2 - 3 layers on (wait some 5 - 10 minutes between layers), let it dry (WELL!) and sand down once under watter with waterproof sand paper of 1000 granity. then spray on one more thin layer, lett it dry (WELL!) and sand again under watter with 1200 granity.

    btw did you know there are more types of polyester body cement available? rather then buying larger can of basic type buy two of them next time - a basic one and fine finish one. of course, using fine finish one will not save you from using primer.

    regarding Bondo... I kinda doubt you could not find Bondo brand in UK if I can buy it in local general store here. in any case the brand is not important. simply ask for polyester filler.

    Comment


    • #3
      You can fill them with spot putty if they are very small. Its basically thick lacquer putty in a tube so give it plenty of time to dry and shrink.
      Fabricator

      Comment


      • #4
        putty... that was the right word i was looking for...

        Comment


        • #5
          ......Also im in uk so theres no Bondo here
          are u serious?????

          Comment


          • #6
            Use duratec surfacing primer.

            Comment

            Working...
            X