Announcement

Collapse
No announcement yet.

Selecting Power Input, Dual Battery with a Voltmeter

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Selecting Power Input, Dual Battery with a Voltmeter

    Hey,
    Im looking to install my voltmeter back in my car. But now that I have dual batteries I would like to be able to select which the meter is measuring. So that I could easily make sure the alt is giving me the 14.4, and waht the rear is reading at any given moment.
    So what im driving at is the need to be able to select my power input. I thought I would be able to use a 5 pin relay and work it out, but it seems I am unable too.
    Any thoughts?
    Cheers
    Anshu
    98 V6 Camry XLE
    Status-Everything is working again!
    No progress while I am in NYC
    Ze Worklog

  • #2
    Use a DPDT -Center off toggle switch. wire the meter to the middle and one battery to one of the other posts, the other battery to the other post. then one on pos. will be battery1, the other pos. battery no.2
    William Surritte, Technician
    No Limit Technologies
    1931 U.S. HWY. 160, Caulfield, MO 65626
    http://home.centurytel.net/nolimititech/
    Planning: |++++ |
    Software Development: |++++ |
    Hardware Development: |++ |

    Comment

    Working...
    X