Announcement

Collapse
No announcement yet.

CarPC project started

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • CarPC project started

    Well in 5 days iv got up to the process of testing it in my car

    I got all the parts in 3days (i just brought it without researching )

    when i find something i wanna do i NEED to do it NOW even if its at 3am lol

    so i got the parts of Ebay and got it all in 3 days of buying and then a day of nothing

    Now i have just screwed the motherboard the 12v PSU and 12v regulator onto a sheet of plastic.

    Ok so here is what i have so far:
    VIA EPIA Mini ITX MII 6000 Motherboard (600Mhz Fanless for less heat)
    128mb Kingston DDR266 RAM
    80w Morex 12v PSU
    i.Trek USB GPS mouse
    4gig HDD (for testing purpose)
    7" UNIPAC composite LCD

    Now i REALLY can't help myself as the guys know on my other post i asked about the MB then brought it before i got a response lol can't help myself

    So here is my setup for now and it will be installed in the car for a test run on the weekend.

    I WILL slow down when i do the install in the car (really dont wanna wreck it)
    Attached Files
    CarPC Status:
    GPS: 99%
    Hardware: 99%
    Software: 92%
    Case Install: 99.9%
    Dash Install: 100%
    Car Install: 72%

  • #2
    And here is my car Ford Probe GT 94

    Cost only $17,000

    Im in australia so these are rare only 300 in australia

    Crappy photo sorry was overcasted
    Attached Files
    CarPC Status:
    GPS: 99%
    Hardware: 99%
    Software: 92%
    Case Install: 99.9%
    Dash Install: 100%
    Car Install: 72%

    Comment

    Working...
    X