Announcement

Collapse
No announcement yet.

mircoATX PSU?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • mircoATX PSU?

    Today I aquired a HP Pavilion 4443 case. The case is the perfect size, infact I'v never seen a case this small. It is roughly a little smaller the the case I planned to make. I have one problem. The PSU is MircoATX. First off I believe the PSU has been damaged to begin with. Which isn't a big deal because I plan to get a DC-DC PSU. Where can I find a small DC-DC PSU that is about the same size of the current PSU? I thought about just using a standard size PSU, but fear that it will be too close to the CPU. The CPU will only have a heatsink, but I will have a 120mm (108 CFM of air) Fan and maybe a 80mm (35 CFM of air) fan. Comments? Suggestions?
    ODYSSEY

    Originally posted by Tidder
    Hey, as long as it's not any particular race I'm offending, I can stand to be a pedophile.
    All information expressed in this post is my opinion, and should not be regarded as a statement of fact.
    Digital-Car UK|

    (\__/)
    (='.'=)
    (")_(")

  • #2
    http://www.arisecomputer.com

    i believe the arise 875 is the one you want.
    That seems the one that people recommend to me here.

    ------------------
    AMD K6-3 450, 15GB HD, 256M Ram
    DVD, 10.4" touchscreen, 2-5' lcd's, ati all in wonder 16mb, Wireless Keyboard, Alpine, MB Quart, JL, Audio Control,
    Winamp w/ Album List Plug-In
    99.9% complete.

    http://www.cardomain.com/ride/212327

    Comment


    • #3
      albysure could you please point me to that psu you are talking about, I could not find it in Arise site..thankx

      Comment


      • #4
        maybe u should make ur own dc-dc ? plans are at sproggy.mp3car.com

        better u are at electronics, smaller u can make it :P
        John McLear - [email protected]
        http://www.205oc.co.uk
        UK Mp3car slapnut
        #mp3car - Efnet
        Carplayer and Mediaengine *****
        spank gemma.co.uk for holding my motherboard for so long. still no board, wood work nearly done :|
        [-----------(90%)----] Completed :)
        pics at: http://www.zcentric.com/~mitcht/gall...me=Convertable

        Comment


        • #5
          is the arise unit going to work with a MicroATX motherboard?

          The arise unit has only 5v and 12v outputs, if the cable is modded to the ATX connector and you manually turned the power supply on is it still going to work?

          just curious..

          Shawn

          Comment


          • #6
            anothamp3frk: he is talking about the ace-865v. Take a look at my setup.....all those gizmo, it powers up including my TFT screen.

            ------------------
            abcd-1
            Author of CobraI and CobraII.
            For more information on the COBRA Application's please visit the link. For the latest or updated info on CobraII please click on the link. Get new updated files for CobraII here. ftp://pictures[email protected]/d:/newdlls
            You can contact me on AOL instant messenger....nick is Cenwesi
            Webpage comming soon!

            Official Cobra Page
            abcd-1
            Author of CobraI,II,III and now CobraIV.
            You can contact me on AOL instant messenger....nick is cenwesi or cenwesi3

            Comment


            • #7
              hey cen, are you using the PSU to power a ATX motherboard though? Or is it an embedded board with a 5 pin connector?

              Shawn

              Comment


              • #8
                thanx cenwesi,
                hey listen I have a question for you, I downloaded CobraII a while back I have not been able to get it going, everytime I scan for mp3s on my drive or cdrom it gives this error
                -CobraII has caused an error in AIRDLL.DLL
                CobraII will now close-
                can you tell what's going on....


                Comment

                Working...
                X