Announcement

Collapse
No announcement yet.

Pci Riser on SP13000

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pci Riser on SP13000

    Hi all,
    as you can see in the attached image, Epia SP13000 have a dissipator near the pci slot. I fear the official Via Pci Riser is not tall enough to install a pci card horizzontally, this could touch the chipsets dissipator. I need to install two cards (Cinergy 600 and Audigy 2 zs) facing the motherboard (Right side PCI Riser I think). But in this way the card on bottom could not have enough space considering the dissipator mounted on the motherboard.
    So, few questions:
    1- There will be any conflict for the two cards running together? Better, can they operate on the same slot (Pheraps i need an active Pci Riser)?
    2- 3.3 or 5 V?
    3- Can someone suggest the right product (I've not been able to find the right product matching my needs)?

    Thanks all.
    Attached Files
    Mercedes A Class 170 CDI
    Carputer Progress:
    [X---------] 10%

  • #2
    Originally posted by Cancer
    Hi all,
    as you can see in the attached image, Epia SP13000 have a dissipator near the pci slot. I fear the official Via Pci Riser is not tall enough to install a pci card horizzontally, this could touch the chipsets dissipator. I need to install two cards (Cinergy 600 and Audigy 2 zs) facing the motherboard (Right side PCI Riser I think). But in this way the card on bottom could not have enough space considering the dissipator mounted on the motherboard.
    So, few questions:
    1- There will be any conflict for the two cards running together? Better, can they operate on the same slot (Pheraps i need an active Pci Riser)?
    2- 3.3 or 5 V?
    3- Can someone suggest the right product (I've not been able to find the right product matching my needs)?

    Thanks all.
    I don't believe there is a 2-into-1 PCI riser.
    I could very well be incorrect, but I've never seen such an animal.
    Have you looked in the FAQ yet?
    How about the Wiki?



    Under normal circumstances, a signature would go here.

    Comment


    • #3


      It exists, will it work ? I dunno Never used them..
      Via Epia M10000 / 512 DDR / 10gigs 3.5 HD / M1-ATX / Innovatek 7" TS Screen
      Trunk fiberglassing in progress...
      Need GPS / Aux Input / WiFi

      My Corolla Computer

      Comment


      • #4
        they do exist, i have one on my MII12000, and it works great, no problems yet with it.

        dont know what to say about the SP13000.
        I wish i knew how to do fiberglass work...

        Comment


        • #5
          Well damn.
          I've never been in the situation where I've needed a PCI riser, let alone a 2-into-1 riser.
          Have you looked in the FAQ yet?
          How about the Wiki?



          Under normal circumstances, a signature would go here.

          Comment


          • #6
            Some miniitx boards allow 3-to-1 PCI riser.
            Now Galileo is real. Muhahahahaha :p

            Comment


            • #7
              Originally posted by DarquePervert
              Well damn.
              I've never been in the situation where I've needed a PCI riser, let alone a 2-into-1 riser.
              damn noobs!

              Comment


              • #8
                I have the MII 12000 and the Dual PCI Riser points the pci slots away from the mobo, not over it.
                "A conclusion is the place where you got tired of thinking."

                Comment


                • #9
                  heres a link to the one on linitx.com that I have
                  "A conclusion is the place where you got tired of thinking."

                  Comment


                  • #10
                    Originally posted by rickster
                    I have the MII 12000 and the Dual PCI Riser points the pci slots away from the mobo, not over it.
                    yeah that one in the pic above does too by the looks of the keying to the PCI slot.

                    Comment


                    • #11
                      CapitaineFritz, the one you posted has 4 pci, two on one side, tho to the other. In addition it will touch the motherboard.

                      rickster, great Link.
                      I need the one attached, but with two slot. Possibly active
                      Attached Files
                      Mercedes A Class 170 CDI
                      Carputer Progress:
                      [X---------] 10%

                      Comment


                      • #12
                        How about using the active Dual Slot riser and then 2 of the flexi risers to take the cards back over the top of the motherboard?

                        http://linitx.com/product_info.php?c...roducts_id=568

                        http://linitx.com/product_info.php?c...roducts_id=311

                        http://linitx.com/product_info.php?c...roducts_id=635

                        : Jetway J7F2 1.5Ghz Mainboard : Cubid 3688 : CarNetix CNX-P1260 :
                        : Netgear 802.11g PCMCIA : 2 x LinITX 7" Screens :
                        : BU353 USB GPS Mouse : Panasonic UJ845 DVDRW :

                        Comment


                        • #13
                          Yes curly, it would be an option, eve if i would prefer an one piece.
                          Mercedes A Class 170 CDI
                          Carputer Progress:
                          [X---------] 10%

                          Comment

                          Working...
                          X