Announcement

Collapse
No announcement yet.

Problem with FusionBrain installation

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with FusionBrain installation

    When I plug the FusionBrain into any available USB port WindowsXPSP2 reports a USB\VID of 0000&
    and PID of 0000& ie unknown product!

    Therefore I cannot install any drivers for it.

    Help, is my FusionBrain broke?

    TIA
    Steve

  • #2
    Please take a screenshot of the VID and PID string.

    Comment


    • #3
      Thanks for the reply, after doing some more research I found h3rk's thread on USB problems
      some of these seem similar to the problem I've got.
      Also after fiddling round the back of another PC that I was testing it on I managed to plug the USB cable actually into a USB socket rather than the LAN socket next to it this PC then recognized the FB.

      I will try to figure out what is wrong with my USB setup on my main PC.

      Comment


      • #4
        Dunno if this will help other people who may have a similar problem.
        I systematically unplugged other devices from USB one by one and found that my webcam was blocking any further device installs on USB. Unplugged and re-plugged the webcam and FusionBrain was then detected.

        Comment


        • #5
          Sounds good, thanks!

          Comment

          Working...
          X