Announcement

Collapse
No announcement yet.

Navigon nck 4.0 gps probs

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Navigon nck 4.0 gps probs

    Hi guys i ve just installed Navigon nck 4.0 with all europe maps and it works perfectly but it does not recognise my garmin bluethoot gps...it says no gps found.I made all settings with com port and i pair the antenna with my car pc before opening the program but nothing...probably it wants some particular antenna?????Mine works perfectly with any other nav software...any suggestion?Thanks from sunny italy

  • #2
    try to change the com port
    ibus error
    GTA skin

    Comment


    • #3
      tryed but nothing to do!!!I ve also downloaded sirf test to check my antenna setting and everything seems to be ok...This is my spgps file:
      [Default GPS]
      GPS=GGA_VTG
      GPS1=GGA_VTG
      GPS2=RMC_GGA

      [GGA_VTG]
      Type=NMEA
      Name=GPS with GGA and VTG messages
      Device=SerialPort
      Input1=GPGGA,utctime,latitude,ns,longitude,ew,qual ity,satellites,hdop,altitude,,,,,
      Input2=GPVTG,course,,,,,,speed,

      [RMC_GGA]
      Type=NMEA
      Name=GPS with RMC and GGA messages
      Device=SerialPort
      Input1=GPRMC,utctime,,latitude,ns,longitude,ew,spe ed,course,,,,,
      Input2=GPGGA,,,,,,quality,satellites,hdop,altitude ,,,,,
      speedMultiplier=1.851998
      speedOffset=0.0

      [SerialPort]
      Port=8
      Timeout=5
      Baud Rate=4800
      Byte size=8
      Parity=N
      StopBits=1
      Binary mode, no EOF check=0
      Enable parity checking=0
      CTS output flow control=0
      DSR output flow control=0
      DTR flow control type=handshake
      DSR sensitivity=0
      Enable error replacement=0
      Enable null stripping=0
      RTS flow control=handshake
      Abort reads/writes on error=0
      XOFF continues Tx=0
      XON/XOFF out flow control=0
      XON/XOFF in flow control=0
      Transmit XON threshold=0
      Transmit XOFF threshold=0
      Tx and Rx XON character=0
      Tx and Rx XOFF character=0
      Error replacement character=0
      End of input character=0
      Received event character=0

      [SerialPort Detection]
      PortCount=6
      TestCount=0
      Defaults=SerialPort



      where is the error????thanks anybody

      Comment


      • #4
        indeed
        i assume that it's a hardware error.
        do you use the stock cable?
        ibus error
        GTA skin

        Comment


        • #5
          first of all thanks for trying help me...I don t know what a stock cable is my gps is a garmin 10 bluethoot connected on serial port com 8 and it works perfectly with map monkey and mappoint on the same port...if you're using a bluethoot gps let me know your spgps file...many thanks

          Comment

          Working...
          X