Announcement

Collapse
No announcement yet.

lilliput 7" cable color guide

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • lilliput 7" cable color guide

    I'm really reaching out here, so any help is appreciated. I had cut my cable and tossed the VGA and USB ends. Well now I'm building a wiring harness for the car and forgot to write down which colors went where on the motherboard I had the pig-tail soldered to.

    Here's what I have and what I've found for searching.

    Cables I used:

    gray
    brown
    blue
    purple
    green

    According to the 8" screen, this is how it should be:
    gray = red video
    brown = green video
    black = blue video
    green = h-sync
    purple = v sync

    I'm hoping I can just swap my blue for the 8" black but I don't want to risk it.

    Also, my old screen had the USB blow out on it, so I picked up the little usb add-on board. I'm soon going to be getting a new screen, and want to build my harness for the add on board and the new screen (in case USB blows out again).

    The cables I have on the Lilliput dongle are:
    red
    black
    white
    yellow

    And the 8" screen is listed as follows:
    LIL - USB
    red - red
    orange - black
    yellow - white
    green - green

    I would assume yellow should be USB green, but again I don't want to guess.


    All the searching I did only showed me pinouts and colors for the 8" screen, which doesn't exactly match mine.

    Any help would be GREATLY appreciated. Thanks guys.
Working...
X