Announcement

Collapse
No announcement yet.

Found an 8" 1024 x 600 High Brightness Open Frame Capacitive Screen Kit

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    thank you your test it and with a Good feedback
    my new store on eaby: http://www.ebay.com/usr/jingsun2008?...p2047675.l2559
    on dhgate: http://www.dhgate.com/product/car-pc...389757123.html
    my store on aliexpress will restarting 5.6 months later, AliExpress enterprise certification requirements, I've been through, but also need to apply for the brand, in this period of time, can not be sold

    Comment


    • #32
      Originally posted by fuchengwu View Post
      thank you your test it and with a Good feedback
      my new store on eaby: http://www.ebay.com/usr/jingsun2008?...p2047675.l2559
      Cool, I just bought the 8" high brightness.
      I put a message on the purchase.
      "Please flash the brightest firmware, maybe russian or something better? I will be using this with Android in my car. Thanks."

      Comment


      • #33
        Wow, he responded within five minutes of me buying the panel.

        Comment


        • #34
          I was also online

          Comment


          • #35
            Hey there Fuchengwu, it arrived today and works perfectly with my Odroid XU4 running Android 4.4.4. All touches register fine.
            How do I power it properly? The screen did not come with a power adapter. I'm using a 5V 4000mAh to test with right now.
            Also, how do I get it to dim or go bright, depending on sunlight?

            Comment


            • #36
              I posted about your display at the Odroid Android subforum:
              http://forum.odroid.com/viewtopic.php?f=94&t=23696

              Comment


              • #37
                you can adjust the bright use that keyboard ,and ,if you want it auto dim,you need make a Such circuitry

                Comment


                • #38
                  frend,you'd better use DC-12V 2000MA adapter

                  Comment


                  • #39
                    Good news, it looks like your touch screen works with a couple other Odroid units also:

                    Originally posted by odroid
                    Thank you for the ID information.
                    Yes! It already exists in our device driver. USB_DEVICE_ID_CYPRESS_TRUETOUCH

                    The touch screen should work with XU4/C2/C1.
                    https://github.com/hardkernel/linux/...hid-ids.h#L252
                    https://github.com/hardkernel/linux/...hid-ids.h#L256
                    https://github.com/hardkernel/linux/...hid-ids.h#L252

                    For the auto dim feature, it looks like all I need to do is to add BPT-BP2314 to the existing circuit, correct?

                    I bought this 12V DC 2A charger and will use it for the power source.
                    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

                    Comment


                    • #40
                      yeah,you are right :)

                      Comment


                      • #41
                        Originally posted by fuchengwu View Post
                        yeah,you are right :)

                        Hi, how do I configure this so that RCA video input takes priority over HDMI?
                        So when my car's backup camera gets power, then the monitor automatically switches to Video input.
                        Then when backup camera powers down, the monitor switches back to HDMI?

                        The five-button keyboard does not adjust backlight option. Only contrast/brightness.

                        Comment


                        • #42
                          Actually, I figured out the reverse camera thing. The LCD Driver Board has a six-pin connector that I'd forgotten about.
                          Your kit came with the six-pin molex with wires attached. So I plug the backup camera into AV1 input.
                          Then I use the red wire on the six-pin connector for auto-sensing. When it gets 12V, the driver board automatically switches to AV1 input.
                          Then back to whatever the last input was after 12V is removed from the six-pin connectors red wire.

                          Comment

                          Working...
                          X