Announcement

Collapse
No announcement yet.

Lilliput USB

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lilliput USB

    I was just curious to know if anyone knew the correlation of the Lilli USB wire colors with that of traditional US USB wire colors


    Lilli= Red, Brown, Yellow, Darkyellow

    US- Red, Black, White, Green

    reds obvious and im guessing brown is neg and the 2 yellows are data

    anyone?
    throw a moon

    heuvos vin chevos

  • #2
    NM figured it out,, for anyone who may ever want to know

    Traditional - Lilli

    Red ~ Red

    White ~ Dark Yellow

    Green ~ Yellow

    Black ~ Brown
    throw a moon

    heuvos vin chevos

    Comment


    • #3
      The other end of it (the TS controller inside) is stupid.

      Black = 5V
      Red = GND
      White/Yellow are normal.

      Comment


      • #4
        Originally posted by Curiosity
        The other end of it (the TS controller inside) is stupid.

        Black = 5V
        Red = GND
        White/Yellow are normal.
        Thanks,, another reason i wanted to know is Armen told me some of the wires in some new Lillis for the controller were mixed up so i tried reversing the 2 yellows as that seemed to be the most plausible thing to happen
        throw a moon

        heuvos vin chevos

        Comment


        • #5
          Those will probably just keep it from working until you get it right, but reversing the other 2 will release the magic black smoke.

          Comment


          • #6
            indeed..
            throw a moon

            heuvos vin chevos

            Comment


            • #7
              Originally posted by PaCMaYNE
              NM figured it out,, for anyone who may ever want to know

              Traditional - Lilli

              Red ~ Red

              White ~ Dark Yellow

              Green ~ Yellow

              Black ~ Brown

              I know I'm bringing up an old thread, but I hardwired my lilliput to a USB cable using the above connections and now the touchscreen doesn't work. Has anyone else wired it up this way? Is there a better way to add a long USB cable to the end of the Lilliput?

              The only other thing I can think of that I messed up my wires/connections when installing the monitor in the dash, since it worked before the install with the regular USB cable.

              Dan
              1997 Corvette

              Comment

              Working...
              X