Announcement

Collapse
No announcement yet.

In-Dash LCD (Head unit style) Powering

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • In-Dash LCD (Head unit style) Powering

    I picked up a cheapo 1-DIN sized flip out LCD off Ebay and of course the directions are in chinese. The power connector has 4 wires (red, black, green, yellow) and I need to figure out what they are.

    I figure red and black are +12V and ground, and this is further supported by the fact that there's an inductor and cap filtering circuit on these lines.

    I'm guessing that the yellow line is to be connected to accessory.

    Any ideas on the green?

    Thanks for any help.

    CarPC v2.5 up and running - all hardware installed, skin configured, and iG tweaked like crazy. Now for OBD-II, and voice control, and camera plugin, and... :nutz: - it never ends!

  • #2
    that sounds about right

    although the yellow might be 12+ and red might be ACC...
    you never know

    green might be for parking brake??
    [||||||||||||||||||||] - final touches
    SUPER 7" VGA w/ TS
    Toshiba Satellite 3000
    P3 850
    256MB
    30GB
    Geforce2 Go
    DVD
    Orinoco 802.11b PCMCIA
    nlite WinXP 350MB installed
    RoadRunner
    iGuidance 2.1
    Holux GM210 GPS
    Xantrex Xpower 300

    Comment


    • #3
      Yellow is constant power, red is acc, blk is gnd, and green should be parking brake.

      Comment

      Working...
      X