Announcement

Collapse
No announcement yet.

Sharp 8.4" TFT Touch Screen With Driver Board

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sharp 8.4" TFT Touch Screen With Driver Board

    i see these on ebay for $22us

    the pic dont work but it says Model # LQ9 D-161. is that dope or what ?

    hes got 8 up on ebay and said winner can choose from 1 to up to 150 of these?

  • #2
    I contacted him by e-mail and you can buy direct for $125. I think that it is just the screen and the inverter. He says it comes with cable also.
    JohnRam

    Comment


    • #3
      which controller will work with these? will this one work? http://www.mp3car.com/cgi-bin/ultima...c&f=4&t=000293

      Comment


      • #4
        yeah, good question about the controller... i would like to know as well, this could be a nice setup...
        Maxima - sold, carputer out of commission
        MR2 - purchased, TEC-2 is the carputer now :)

        Comment


        • #5
          22us is alot better than 125us, says comes with driver board too plus a sharp LQ9 D-161 would work with pretty much anything.

          Comment


          • #6
            It's a 12-bit color TFT. (4096 colors)

            Pinout is here (I think.)

            Cable Kit (If needed) is here

            "With Driver board" - possibly for the touchscreen?

            [ 10-04-2001: Message edited by: Meatballman ]

            Comment


            • #7
              I am pretty new to the full screen LCD's so I just wanted to ask some more questions.
              You say:

              plus a sharp LQ9 D-161 would work with pretty much anything

              How? What controller do you need?
              I would really like a full graphic display, but am not sure where to start.
              thanks

              Comment


              • #8
                Originally posted by jnewlin:
                <STRONG>
                How? What controller do you need?
                </STRONG>
                I think he means that this screen is pretty widely supported with the popular controller chipsets. For example, most of the popular Chips & Technologies chipsets (ie.. C&T 65545, C&T 65550, C&T 69000) will work with this LCD.

                Comment


                • #9
                  I won the auction for one of these, so I'll let you all know how good they are. Hopefully it won't be too difficult to get it connected to my PCM-5862.

                  Comment


                  • #10
                    Yeah, let me know how it works out. I am very interested. Good luck.

                    Comment

                    Working...
                    X