Announcement

Collapse
No announcement yet.

monitor problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • monitor problem

    Hi,
    (excuse my english)

    I have bought a indash touchscreen vga monitor.

    I have 4 wires:

    yellow - (+)
    black - (-)
    red - (key)
    green - (GND)


    can you explain how to connect the monitor to the power supply?


    thanks

  • #2
    yellow and red to 12 v line
    and black and green to ground

    alternatively wire from the car it will have a regulator in the monitor
    then its just like a headunit and take the supply from there
    that would be

    yellow to 12v
    red to acc
    black and green to ground
    http://www.customcarcomputers.co.uk

    Comment


    • #3
      thanks, I will try

      Comment


      • #4
        Originally posted by turner brown
        yellow and red to 12 v line
        and black and green to ground

        alternatively wire from the car it will have a regulator in the monitor
        then its just like a headunit and take the supply from there
        that would be

        yellow to 12v
        red to acc
        black and green to ground
        how do you see the difference between acc and 12v they have both same colour
        ibus error
        GTA skin

        Comment


        • #5
          Originally posted by sarasini
          Hi,
          (excuse my english)


          yellow - (+)
          black - (-)
          red - (key)
          green - (GND)

          yellow is 12v
          red is key or acc
          not hard
          http://www.customcarcomputers.co.uk

          Comment

          Working...
          X