Announcement

Collapse
No announcement yet.

eclipse avn5435 carputer help!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • eclipse avn5435 carputer help!

    Hello, I am new and was needing some knowledge about connecting a carputer to a navi headunit.

    I have an eclipse avn5435 touchscreen 2 din headunit in my 01 Audi S4. I am planing on buying a Mini ITX Carputer Car PC off ebay and hooking it up. The headunit only comes with one video in (one red, one black, and one yellow) connections.

    My question is: can I use an rca to s-video converter and a regular rca cable to connect the mini itx to the headunit?

    What problems may occur? How would you suggest connecting the car pc to my headunit if it doesn't have a VGA or USB plug.

    Thanks.

  • #2
    While it is possible to use it as a computer screen in this way, it isn't recommended as the low image quality of rca video can make text hard to read. Also, the touchscreen can't be used with the computer as there isn't a way to connect them.

    If you already know this but want to do it anyway, then just try it, but you might find yourself better off getting a VGA screen with USB touch.

    There isn't really a standard setup, because it depends on what you want, and car pc's are often built up over time, and this could be a good temporary starting point setup until you know what you want.
    Acer Aspire One carputer
    1983 Mitsubishi Sigma SE
    Progress: [||||||--------------]
    Temporary netbook setup complete
    Planning a real carputer...

    Comment


    • #3
      i'd recommend that you use a vga screen with usb like he said, but you'll need to install a amplifier for your speakers if you get rid of the eclipse.
      you might find a double din pre-built lcd with amplifier that will just bolt in, or you can modify and install a lilliput yourself and install a door speaker amp under the seat.

      your car pc will replace everything the eclipse does, so you can always sell that on ebay to get a little money back for the screen and amp.
      you'll only need to get a usb GPS reciever to have the nav feature that you'll loose when you get rid of the eclipse.

      but you can still use an adapter to go from vga or svideo to rca to plug into the eclipse for initial testing and setup, to see if you want to go the car pc route. you'll have to use a mouse and keyboard though. and the quality will be poor (text will be hard to read etc)

      hope that helps
      Scion xB G2
      Planning: [----------]
      Parts: [----------]
      Install: [----------]

      My Scion PC Project (put on hold until I find a nicer host):
      Worklog

      Comment


      • #4
        Thanks. I just received my rca to s-video converter. I am going to test it out over the holiday. So I can't use the touchscreen 2 din to control my comp? Thats lame.

        I have cf running with igo on my pc. I need some help configuring it. I have searched but still am unsuccessful. First, I have cf running and its taking up the full screen on my laptop which is 18" but when IGO is running its only taking up 800x430, will this change on the smaller 6.5" screen or just get smaller?

        Secondly, everytime I open IGO through CF and touch outside the screen to pause on CF, IGO disappears and than when I reopen it on CF, it opens IGO a second time. How do I configure IGO to work correctly with CF?

        Comment


        • #5
          Originally posted by Z3R013 View Post
          Thanks. I just received my rca to s-video converter. I am going to test it out over the holiday. So I can't use the touchscreen 2 din to control my comp? Thats lame.
          No, you can't, at least not without reverse-engineering the touchscreen in the Eclipse unit and adapting it to PC use.
          Lame? Perhaps.
          But those are the choices you made when purchasing hardware. Deal with it.
          Have you looked in the FAQ yet?
          How about the Wiki?



          Under normal circumstances, a signature would go here.

          Comment


          • #6
            Originally posted by DarquePervert View Post
            No, you can't, at least not without reverse-engineering the touchscreen in the Eclipse unit and adapting it to PC use.
            Lame? Perhaps.
            But those are the choices you made when purchasing hardware. Deal with it.
            I didn't purchase any hardware, it came with the car. I am trying to deal with it by making the best with what I got. What I got is a sick *** Audi s4 which dominates your LAME Tacoma. Thanks for the help.
            I am being sarcastic... If you can't find it here, than look HERE.

            Comment


            • #7
              See, there is where you're wrong.
              You did purchase that Eclipse unit as a package deal with your Audi.

              I'm certain that you weren't considering the PC-in-the-ride thing at the time, so had no idea about the pros & cons of such a unit for PC use at that point and time.
              No harm no foul.

              And if you think my Taco is lame, let's have a little challenge...
              How many full-size 4' X 8' sheets of plywood (or drywall or pressboard or MDF or whatever) can you haul with your S4?

              Sure, you got me beat with top speed, acceleration and even ride comfort. But you can't make squat for beer money helping people move with an Audi.
              Have you looked in the FAQ yet?
              How about the Wiki?



              Under normal circumstances, a signature would go here.

              Comment

              Working...
              X