No announcement yet.

2 years later, I assembled my Morex bundle...

  • Filter
  • Time
  • Show
Clear All
new posts

  • 2 years later, I assembled my Morex bundle...

    So I started collecting parts for my CarPC project 2 years ago, the Morex bundle was one of the first things that I picked up. It has sat unassembled in the closet since then. I went to assemble and install the other day, but it wont power up. I re-watched the building tips and tricks video and I'm lost as to where I went wrong and figured an experienced eye will catch what I did wrong, as I am no whiz... Thanks in advance for any ideas!
    Attached Files

  • #2
    You need a jumper wire on the front panel connector on mainboard to turn on the pc, whether from M2 (J8 to mainboard) for automatic startup or from front of case power switch if in dumb mode SNO
    Last edited by SNOtwistR; 10-15-2013, 03:23 PM.


    • #3
      Thanks for the reply. I found the jumper in my parts bin, but I'm not entirely sure where to plug it in, I'll have to search that. Also, it seems I'm missing the P4 connector? Probably help if I listed what was in my bundle... Intel D510MO Intel Desktop Board With integrated Intel® Atom™ processor D510, M2-ATX 160W Intelligent DC-DC PSU, Major Brand 2GB DDR2 DIMM 800MHz, PC2-6400 RAM, Morex 5677 Mini-ITX Case Without PSU