No announcement yet.

DSATX 4.5V output in all rails?

  • Filter
  • Time
  • Show
Clear All
new posts

  • DSATX 4.5V output in all rails?

    My DSATX stopped working after less than 6 mo. of use...

    Now I only see 4.5V output in all rails, the computer pulses on and off. Any solution? What could it possibly be?

    No error codes: the red led goes on, acc off, the red led blinks once, etc. The CPU fan starts for a second, then stops. With a 120V AC PSU, the computer starts fine, the 12V rail (say, on the 4 connector cable to the MB) only shows 4.5V on the DSATX, while shows 12v on the normal 120V PSU.

    I just changed my case, maybe I have damaged something with some static electricity discharge or something? Physically it looks fine...

    Sounds like it's repairable?
    Worklogs: 08 Sequoia Platinum Carputer (In Progress!)
    Skin: MetroSex on the Beach preview

    07 Infiniti Fx35 (done!) & 06 Infiniti M35 (gone...)