Announcement

Collapse
No announcement yet.

Assist with PW-70A and ITPS wiring please

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Assist with PW-70A and ITPS wiring please

    OK, ready to install PW-70A and ITPS. Boy, the instructions that come with these are horrible but I think I have it figured out.

    The PW70-A snaps onto the motherboard. Easy enough.

    I then assume that the wires from the ITPS plug one are spliced onto the PW-70A wires #1. Then the wires from ITPS #2 are the ones that connect to the vehicle itself.

    Refer to these photos please.
    http://photos.yahoo.com/bc/milleda31

    Thank you for your assistance.
    Kenwood KVT-911DVD
    Sony XVM-R75
    Morex 3688
    VIA EPIA M10000
    512mb DDR
    Windows XP Pro
    Linksys Wireless-G

  • #2
    Sounds right.

    I am also guessing that the 2-wire plug you haven't marked on the ITPS is for the power button on the MB.
    Do not confuse it with the similar 2-wire plug on the PW70A, as it is 5V for extra devices.

    Comment


    • #3
      Originally posted by P4_2.66GHz
      Sounds right.

      I am also guessing that the 2-wire plug you haven't marked on the ITPS is for the power button on the MB.
      Do not confuse it with the similar 2-wire plug on the PW70A, as it is 5V for extra devices.
      I hooked up the one from the ITPS to the motherboard. The one from the PW-70A is left unplugged.

      Correct??
      Kenwood KVT-911DVD
      Sony XVM-R75
      Morex 3688
      VIA EPIA M10000
      512mb DDR
      Windows XP Pro
      Linksys Wireless-G

      Comment


      • #4
        Originally posted by milleda31
        I hooked up the one from the ITPS to the motherboard. The one from the PW-70A is left unplugged.

        Correct??
        Yes, that does seem right.

        Comment


        • #5
          Originally posted by milleda31
          I then assume that the wires from the ITPS plug one are spliced onto the PW-70A wires #1. Then the wires from ITPS #2 are the ones that connect to the vehicle itself.

          Refer to these photos please.
          http://photos.yahoo.com/bc/milleda31

          Thank you for your assistance.
          I'm trying to learn this stuff. I'm not an electrical guy. Definitely a noob. Excuse my ignorance.

          You mention splice above for the connection from the ITPS to the PW-70A. Do they not just plug together?

          Also....

          I see an AC to DC power supply that lists it is compatable with the PW-70A ( http://shop.store.yahoo.com/ituner/ac12v9aswpoa.html ) Is there an input for the round plug coming off that power suply. I would assume this would be useful for testing indoors with an AC outlet before moving it to the car. Is my assumtion correct?

          Thanks..

          Comment

          Working...
          X