No announcement yet.

Voltage issues with ITPS?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Voltage issues with ITPS?

    I tested my itps setup today becuase i get random reboots at varying intervals.
    My setup is :- 12v from car battery to 3 3a diodes in parallel, then to a 1.2ah sealed battery, then to input of ITPS, output to epia M10k in Travela C134 case with original psu.

    Ignition off = 12.04v
    Ignition On = 14.19v
    Voltage after diodes = 13.25v
    Voltage in ITPS = 13.25v
    Voltage out of ITPS = 11.2 - 11.8v varies

    I noticed that every now & then the O/P voltage of the ITPS drops to 10.2v for a second,
    Could my ITPS be Faulty?
    Would it be damaging to the psu to bridge the voltage regulation on the ITPS?

    Any help would be appreciated


  • #2
    Take something out of the equation...

    Try pulling the diods and the 1.2aH battery out and see if it makes a difference.

    Mine works just dandy.