No announcement yet.

How do i make -8V from 12V power?

  • Filter
  • Time
  • Show
Clear All
new posts

  • How do i make -8V from 12V power?

    How do i make -8V from 12V power?

    Do i just need to use

    -8V regulator(7908) and connect like this?
    |    7908       |
    |      |        |
    |      |        |
    12V    Ground   X
    then will I get -8 from X?

    is that all i have to do it? or do i need other stuff too?

    let me know about this and if you have good web site about this or schematic..

    PS: i am trying to Sharp 6" work so i need 12V(from car) 5V( and -8V...

    LQ6RA01 from bought from jay) i think.. and have only bare LCD part
    <A HREF="" TARGET=_blank></A>

  • #2
    That won't work. The 79xx series regulators require a negative voltage input. Check out under Voltage Inverter and Voltage Inverter II for some circuits...
    Player: Pentium 166MMX, Amptron 598LMR MB w/onboard Sound, Video, LAN, 10.2 Gig Fujitsu Laptop HD, Arise 865 DC-DC Converter, Lexan Case, Custom Software w/Voice Interface, MS Access Based Playlists
    Car: 1986 Mazda RX-7 Turbo (highly modded), 1978 RX-7 Beater (Dead, parting out), 2001 Honda Insight
    "If one more body-kitted, cut-spring-lowered, farty-exhausted Civic revs on me at an intersection, I swear I'm going to get out of my car and cram their ridiculous double-decker aluminium wing firmly up their rump."


    • #3
      I was jus designing almost free DC-DC ps for myself and I found this:
      This will make -12V@ ~500mA from 5V

      It will easily do -8V if you use 7908 after that circuit and 7805 before.
      You need only few parts besides that and they all are easy to get!
      Project almost ready