No announcement yet.

Help with Sproggy

  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with Sproggy

    Hi all,

    I am trying to build a sproggy mk2.5 ps but i am having problems trying to get the coils and transformer from coilcraft, does anybody have a spare one or know how i can get one?

    95 mitsubishi Magna

    MK2 <+++++++-->80% (On Hold for MK3)
    MK3 <----------->5% (Obtaining Parts)

    pentium II 233, sproggy 2.7 ATX ps, 10 in Active Matrix VGA LCD, Custom keyboard, 802.11b Networking , Creative Remote, Relay Control

  • #2
    Unfortunately, you'll have to get the transformer from them directly, as I've not been able to find a suitable replacement. However, the coils can be purchased at (where I got a large chunk of my parts for it).

    The 47uh inductor (bobbin type) is p/n 1447383 on mouser ($2.62/ea).
    The 10uh inductor (bobbin type) is p/n 1410383 ($2.49/ea).

    The Transformer will run you about $25 from Coilcraft. They charge some outlandish $20 handling fee on top of the $5 product cost.
    CarMP3 system:
    200mhz, 20gb hotswapable drive, 128mb, Winamp w/full-screen vizes, (upgrading to WinAmp3 in near future), 5" LCD screen, controled by numberpad, Sproggy PS under construction, custom mounting case under construction.