Announcement

Collapse
No announcement yet.

Coilcraft parts in Europe? Yes, here!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Coilcraft parts in Europe? Yes, here!

    Hi,

    sorry for posting this in a new thread, too; but it might be seen by some more interested people then.

    I have real problems to get the Coilcraft/Renco parts as samples or in a small quantity, and so have a lot of others, especially in Europe.

    But there might be a solution...

    I spoke with the German Coilcraft distributor, and they are willing to send me the stuff for a very reasonable price (I own a company, sometimes that opens doors easily).

    The T6 would be around 4,30 €, the inductors would be around 1,50 €.

    The only problem is that I would have to buy packs of that stuff as they don't sell single parts.

    I would have to buy minimum 49 pcs. of the T6, and 88/81 of the inductors each.

    Now, I would do the deal and send the stuff out to anywhere in the world if I find enough people who are seriously interested (cause I would have to pay around 500 € in advance); of course I would do it just for covering my costs, with no commission.

    Anybody interested?

    cu
    tsingsu

  • #2
    Hi ,
    could you please tell me the Name and Adress of the distributer ?

    Many Thanks


    Felix
    =>> Carpc Version2 -- Epia M 10K based<<=
    ::Epia M10k,7"VGA/40GB2.5",GPS,Opus90W ::
    ::trying to build second low cost carpc::
    ::Automp3.de :: CAR= Renault Clio2 - 2 seats 1.9D

    Comment


    • #3
      Hi,

      yes, of course:

      Impact
      A division of Memec GmbH
      Heiligenstraße 75
      D-41751 Viersen
      Phone +49/2162/5039-0
      Fax +49/2162/5039-371

      cu
      tsingsu

      Comment


      • #4
        Yessssss, at last!!

        I'm trying for a while to get those parts!!!

        Count me in for:

        2 * T6
        4 * 10uH
        4 * 47uH

        How is the payment arranged?
        Actual mp3car status:
        <####----------------->
        Getting all the parts together, software is ready ;)

        Comment


        • #5
          Posting to the new thread (cross posting)

          I would also have some:

          2 x T6
          4 x 10uH

          In addition, smookiwi is after 2 x T6

          Thanx

          Comment


          • #6
            @Knoetje

            payment is not a problem; I would accept paypal (preferred), bank transfer, cheque, ... whatever you like.

            cu
            tsingsu

            Comment


            • #7
              Ok, ill try paypal

              I hope you can deliver those parts, else i do have a problem...
              Actual mp3car status:
              <####----------------->
              Getting all the parts together, software is ready ;)

              Comment


              • #8
                Hi ,
                basicly I'm interested ! but before starting building a 12 => 12 V DC Power supply I've to make run my install. (screenprobs etc.)
                Hope you would still have some parts in september /october ( I'm on holidays before)



                Felix
                =>> Carpc Version2 -- Epia M 10K based<<=
                ::Epia M10k,7"VGA/40GB2.5",GPS,Opus90W ::
                ::trying to build second low cost carpc::
                ::Automp3.de :: CAR= Renault Clio2 - 2 seats 1.9D

                Comment


                • #9
                  Hi tsingsu,
                  If you don't get enough interest then I'll order from bull and distribute (also posted on original thread) once I find out Western Union works
                  Cheers.

                  Comment


                  • #10
                    @MGP3Car

                    It seems that I can't get enough people on the list.

                    I could sell approx. 10 T6 now, but I don't want to sit on the rest; so if you order parts from bull, I would be in.

                    cu
                    tsingsu

                    Comment


                    • #11
                      @tsingsu
                      @Knoetje

                      I guessed that the minimum quantity might be too high. I've started a new thread in the Wanted/For Sale forum for a multibuy from Bullzsht, I'll leave it there for about a week before ordering.

                      Just post a list of what you need.

                      ~MGP3Car

                      Comment

                      Working...
                      X