Announcement

Collapse
No announcement yet.

P2140 won't turn all the way off anymore

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • P2140 won't turn all the way off anymore

    Somehow I got the P2140 so it won't do a full off anymore. It just goes in to suspend mode (blinking red LED, 12V output still on). Even though I have a 1 hour deadman's timer, it is still in that mode the next morning.

    I'd rather it do a full-off so I don't drain the battery.

    I've also had issues with it not shutting off at the low voltage shutdown. It took my battery down to 3 volts (which ruined an already weak battery).

    I've got a new battery now, and just want the thing to turn OFF when I turn off the car. The PC properly shuts down, but the P2140 won't completely turn off.
    Zotac H55-ITX w/ 802.11n WiFi, i3-550/3.20GHz, 8GB DDR3 1333MHz, 120G Intel SSD, P2140,
    7" pseudo-transflective resistive TS, Win7-64, Centrafuse 4.3, Elmscan Compact 6, BU-353, Rear camera, Trailer camera

  • #2
    Well I did a reset to factory defaults on it, and it seems to be working better now. At least it powers down when it should.
    Zotac H55-ITX w/ 802.11n WiFi, i3-550/3.20GHz, 8GB DDR3 1333MHz, 120G Intel SSD, P2140,
    7" pseudo-transflective resistive TS, Win7-64, Centrafuse 4.3, Elmscan Compact 6, BU-353, Rear camera, Trailer camera

    Comment

    Working...
    X