Looking for suggestions (oldspark time to shine) I want to power my rv-puter from my solar side of things, here is my delema. I would like to also charge the rv house battery from the solar array but not use the rv house battery to power the rv-puter. I would like the existing RV house system to stay the same as it is now. (see primitive stick drawing...grunt...snort) Also I would like the truck alternator charge all batteries as I drive. They are all new batteries and a new 100 amp alternator. starting battery is 24 series 1000cca rv house 27 series deep cycle 105ah and the 2 solar batteries are 27 series deep cycle 105ah. My current draw with rv-puter running is just under 4 amps, solar array is outputting slightly over 10 amps. Most wire lengths that matter are all under 5' and all over rated in size and quality. ( I used to wire up telecom hardware at cell tower sites, they spare'd no expense since we are paying) I should add that being so old the rv has very little draw when running, just a coil,points and condensor. Thanks SNO
No announcement yet.
Looking for suggestions