Announcement

Collapse
No announcement yet.

questions

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • questions

    I had this same problem in 1.5 and so i assumed it was a bug...however it appears to be back again in 1.6.

    1. volume control - the volume drops down to 0% on a random basis. It seems to happen whenever NAV gives voice directions...

    which brings me to my second problem.

    2. the voice prompts for nav are not audible? The music pauses (drops the volume down) and i don't hear a thing.

    Anyone have any suggestions?
    Asus Pundit Barebones PC
    7" Lilliput LCD
    P4 2.8ghz 512mb 120gb
    Windows XP Pro, VOICES
    Sony Xplode 10in Sub, Rockford 600w amp
    Pioneer 6x9's and 4x6's, Kenwood 4ch amp
    Black Widow Alarm with Pager

  • #2
    Anyone have these problems? the volume is driving me nuts!
    Asus Pundit Barebones PC
    7" Lilliput LCD
    P4 2.8ghz 512mb 120gb
    Windows XP Pro, VOICES
    Sony Xplode 10in Sub, Rockford 600w amp
    Pioneer 6x9's and 4x6's, Kenwood 4ch amp
    Black Widow Alarm with Pager

    Comment


    • #3
      Not I. But I use iguidance. whats your error.log file say?
      ==========================================
      Scion tC 2005 with DWW-700H
      Via Eden M10000, 512MB, 100GB 5400rpm, Xp Pro

      Comment


      • #4
        I haven't checked, didn't know it existed.

        What about the volume issue? It randomly drops to 0.
        Asus Pundit Barebones PC
        7" Lilliput LCD
        P4 2.8ghz 512mb 120gb
        Windows XP Pro, VOICES
        Sony Xplode 10in Sub, Rockford 600w amp
        Pioneer 6x9's and 4x6's, Kenwood 4ch amp
        Black Widow Alarm with Pager

        Comment


        • #5
          Open up your error.log file in notepad. (Its in the Centrafuse install directory). Select all, Delete, Save.

          RE-create the volume problem (you might want to also post the steps to reproduce here). Close CF, re-open the error.log file and see whats breakin.
          ==========================================
          Scion tC 2005 with DWW-700H
          Via Eden M10000, 512MB, 100GB 5400rpm, Xp Pro

          Comment


          • #6
            I will do that tonight.

            As for recreating it...i really don't have to do anything to recreate it...it happens every few minutes. i really don't have a special config in any way either.

            Also i should note, when CF first launches...vol is dropped to 0, every time.

            The volume for REAR/SUB doesn't work either in the EQ section of the program. Only the one slider works. I'm using KXX drivers on an audigy.

            Thanks for your replies.
            Asus Pundit Barebones PC
            7" Lilliput LCD
            P4 2.8ghz 512mb 120gb
            Windows XP Pro, VOICES
            Sony Xplode 10in Sub, Rockford 600w amp
            Pioneer 6x9's and 4x6's, Kenwood 4ch amp
            Black Widow Alarm with Pager

            Comment


            • #7
              remember to manually select NONE in the volume control section of EACH embedded apps and plugin.. works for me
              Peugeot 206 1.4 HDi

              Intel Mini-ITX Mainboard
              Celeron 1.2ghz
              256mb DDR-2 533
              80gig 3.5" SATA HDD
              Sb Live 5.1 w/ KXProject Drivers
              M2-ATX
              8" Lilliput TS LCD

              100% installed and working :D

              Comment


              • #8
                each plugin? i didn't know there was a volume section...i'll check into that though
                Asus Pundit Barebones PC
                7" Lilliput LCD
                P4 2.8ghz 512mb 120gb
                Windows XP Pro, VOICES
                Sony Xplode 10in Sub, Rockford 600w amp
                Pioneer 6x9's and 4x6's, Kenwood 4ch amp
                Black Widow Alarm with Pager

                Comment

                Working...
                X