Announcement

Collapse
No announcement yet.

Having trouble getting Tiger on a Lombard PowerBook

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Having trouble getting Tiger on a Lombard PowerBook

    I got a G3 powerbook 320mb mem 5gb hard disk

    - I know tiger will run on it - but - My unit has no firewire-
    no DVD drive - So I thought - I will use disk utility to clone
    the drive on a G3 desktop - buy taking the laptops drive out and
    putting it into a USB adapter - thats all I got on hand - I can
    get a laptop to desktop IDE hard disk adapter at work - I may
    have to use it

    - I tried to bless the drive with - TIGER2 is the USB drive -

    sudo bless -folder "/Volumes/TIGER2/System/Library/CoreServices" -bootinfo "/usr/standalone/ppc/bootx.bootinfo" -label "TIGER2" -setBoot -verbose

    and got it to boot a little - but it stops at a blank blue screen
    and looks like its trying to load something

    I am not that good at linux/bsd commandline stuff - and think
    my command is not right - any ideas

    I tried to reset the pram and all that -

    I gess, all there is left to do, is put the laptop drive on the
    IDE bus of the desktop and do a install

  • #2
    for 10.00 apple will exchange your disks and give you a good set of CD-rom install disks, there might even be some on ebay so look around. But you first might want to check you have enough memory and all the other system requierments.

    Comment


    • #3
      Originally posted by bcohen5055
      for 10.00 apple will exchange your disks and give you a good set of CD-rom install disks, there might even be some on ebay so look around. But you first might want to check you have enough memory and all the other system requierments.
      Its a unsuported model - only because it lacks firewire and DVD drive,
      some have upgraded to DVD drives and used a cardbus fireware card
      and got it to work on the same model as mine

      and there is a 400mhz with DVD and firewire - with the same
      motherboard but it has a DVD decoder chip

      so the hardware will work -

      I got it to boot to the desk top in safe mode

      and found out that

      sudo bless -folder /Volumes/TIGER2/System/Library/CoreServices -bootinfo /Volumes/TIGER2/usr/standalone/ppc/bootx.bootinfo

      should be enough to bless the USB drive

      now just got to do some google-ing

      Comment


      • #4
        ok so far

        (1) I removed the PowerBook drive - and placed into a usb drive
        adapter - then pluged that into a Mac Desktop Running Tiger

        (2) I used Disk Utility to clone a OSX Tiger setup, because I cant
        install for lack of DVD or FireWire

        (3) I Blessed it using - on the computer I cloned it from -

        sudo bless -folder /Volumes/TIGER2/System/Library/CoreServices -bootinfo /Volumes/TIGER2/usr/standalone/ppc/bootx.bootinfo

        (4) Placed the drive back into the powerbook

        (5) Booted into "Safe Boot" by holding down "Shift" when you
        power on the PowerBook

        (6) Ran Disk Utility to check Hard Disk

        (7) Went to "/System/Library/Extensions" in finder - removed extensions
        for FireWire, Nvidia, and ATI Radion, AirPort, Printers, Joysticks

        (8) Used "OnyX 1.6.7" its Freeware, to clean system

        (9)System now boots - even if slow -

        Just got to optimize the system now

        Comment


        • #5
          (10) Open finder, go to "/Library/Preferences" move the "Preferences"
          folder to the desktop, or were ever, - and reboot - if it boots faster
          just delete the folder "Preferences" if not I guess put it back,
          - left on its own, the "Preferences" folder will be re-created

          I now have a fast booting G3 PowerBook using OSX Tiger

          Comment

          Working...
          X