Announcement

Collapse
No announcement yet.

PhoCo is resetting my computer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • PhoCo is resetting my computer

    This is possibly one of the weirdest/most annoying problems I have had with my carputer to date. Whenever I start PhoneControl or run the Phone Test, the program begins to load and then restarts my computer. Any ideas on why it would do this or what settings I could try to adjust? Thanks.

  • #2
    Sounds more like a hardware problem than Phoco - do you get a blue screen or anything???

    If you're on XP or 2000 check the Windows Event Logs to see if there are any errors, you can do this by, Control Panel, Administrative Tools and choose Event Logs/Viewer

    Comment


    • #3
      dag yo...

      no...no blue screen of death or anything. i'm assuming i messed up some sort of configuration because phonecontrol used to connect to the phone (eveything wasnt working, such as phonebook and what not...but i was still working on that). also, i can still get that "incoming call" bubble when phonecontol is closed. its crazy weird...

      Comment


      • #4
        wiggity wack

        As i approach 5 am, i have stumbled across some more information. Though not at first, i am now consistantly reciving those annoying "send error report" dialogue boxes when my system reboots. i started to send them in and microsoft is unhelpful as usually, sending me to this site:

        http://oca.microsoft.com/en/response...1fcb739&SID=11

        It says something about my graphics device driver, but cannot tell me exactly what the problem is. The article also says I'm supposed to get some error message like "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER ", but I dont. Maybe my computer is just turning off before i see this though.

        So, now the question is does my problem have anything to do with the PhoCo software at all? Does PhoCo try to display something that is incompatible with my graphics device? Or does microsoft have no idea what they are talking about (wouldnt supprise me...)?'

        Any suggestions/solutions/ideas/hints??? I hope someone can sort out this wacked out mess...

        Thanks!

        Comment


        • #5
          Try updating or going back a version for your graphics driver.
          [H]4 Life
          My next generation Front End is right on schedule.
          It will be done sometime in the next generation.
          I'm a lesbian too.
          I am for hire!

          Comment


          • #6
            still goin...

            yea...i tried both of those to no avail. i am begining to think that the graphics driver problem is not what is causing my computer to shut down (though i am by no means certain). i was looking up the error on the internet and the issue seems to be caused by high demand programs with high resolution. there was a fix for it on HP's website, but it didnt help me when i installed it. is it possible that microsoft is just mistaking my actually error with another error that has similar "symptoms"?

            heres some more info too. the computer doesnt have any problems until PhoCo is running AND there is a bluetooth connection between my phone and computer. I can have a BT connection to transfer ringtones and use the audio gateway and what not (as long as PhoCo is not running) and i can launch PhoCo with the wrong port number (PhoCo will just tell me something like "no port"). If i launch PhoCo with the wrong port and then open the audio gateway, this also makes my computer hard restart.

            Also, i dont think i mentioned what devices i am using...that might help you help me. so here they are:

            SE T616
            Belkin F8T001
            WIDCOMM 4.0.1.700
            Windows XP Home
            PhoneControl.NET 1.4.3.19516

            ::whoot::

            Comment


            • #7
              So much for that yos...

              Well, today I recieved a rather disturbing e-mail from Captain Z...

              Hi Kevin,

              yes, I've heard about but there is no solution yet.
              The problem you're talking about is not PhoCo releated. Unfortunatelly I
              can't tell you to what it releates to.
              It is either the Widcomm driver, your BT-Dongle or the USB driver or even a
              combination.
              Since I know that people have switched to another computer (with the same
              driver and dongle) and got it running, I'm guessing it has to do with the
              native USB support (but that's just a thought).

              If you have the chance to try a cable connection on this machine, do this
              and you will see PhoCo running without any other change.

              Z.

              Luckily, I have another computer to switch to. (I was just testing this in my house...hehe.) Hopefully you are equally as lucky if you are caught with this problem. Anywho, I'm kind of interested in this situation, so i think I might keep working on it. If I figure it out....I will post again.

              AND A BIG THANKS TO EVERYONE WHO HELPED (or atleast tried)

              Comment


              • #8
                Originally posted by Captain Z
                It is either the Widcomm driver, your BT-Dongle or the USB driver or even a combination.
                Since I know that people have switched to another computer (with the same
                driver and dongle) and got it running, I'm guessing it has to do with the
                native USB support (but that's just a thought).

                Well, I had the same problem on my (somewhat) nLite'd desktop computer, with the drivers that came with the LinkSys USB dongle I got PhoCo working... well sort of anyway, it never read the contactlist but that might have been my fault.

                Anyway, I installed Widcomm 4 and then got a nasty BSOD as soon as PhoCo tried to access the phone... same error as others "IRQ....".
                So I tried it on my carputer which at the time had a stock XP SP2 install, installed Widcomm 4 and PhoCo and everything was working just fine.

                /M

                Comment


                • #9
                  still no answers from me

                  well, i tried messing around with PhoCo on my other computer some more but nothing i try seems to work. lucky for me everything works perfectly on my other computer. so, if your having trouble with PhoCo restarting your computer, the best advice i have (as of right now) is try another computer. if anyone does find a solution before i do, i would like to know though, so please post. thanks and good luck!

                  Comment


                  • #10
                    I have the same problem.
                    Phoco is running on HomePC, but not on the CarPC. That's the cause why I haven't bought Phoco already? What can we do? Another BT dongle?

                    Winni

                    Comment


                    • #11
                      I've just come across this problem on my laptop, was trying to get phoco working with my Ericsson T68, everything works fine outside of Phoco until I try to access the Com Port. Will have to try it on another machine to see if it helps.

                      Comment


                      • #12
                        Grrrrr,
                        today I have installed WinXP with SP2 new, tried a BT dongle from a friend, have installed the latest framework and directx, but always the same problem on my carpc!! (Shuttle XPC, FN61 Mainboard)
                        At home everything works fine. (Same BT dongle, drivers,...)
                        I think the buggy widcomm driver are guilty. With Microsoft drivers both dongles worked fine...
                        What can I do?!?

                        Winni

                        Comment


                        • #13
                          Originally posted by kmccann
                          The article also says I'm supposed to get some error message like "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER ", but I dont. Maybe my computer is just turning off before i see this though.
                          You aren't going to see these types of messages unless you switch it so the blue screen is displayed. Right click my computer/properties/Advanced tab/Startup and Recovery settings/Uncheck the box in the system failure section that says automatically restart. That is the only way you will get the blue screen. Once you do that you should have some more information on what is causing the problem.
                          AMD XP 2600+/512MB RAM/120GB hard drive
                          Opus 150W/DVD/GPS/7" Lilliput TS/802.11g/Bluetooth
                          Installed.


                          -GPSSecure- - GPS Tracking
                          -AltTabber2.2.2- - Handy touchscreen utility.

                          Comment


                          • #14
                            I have soluted the problem by installing older widcomm drivers (1.4.3.4).
                            Perhaps my Carpc don't like widcomm 4.0.1.7 drivers, so I have to switch back...

                            Winni

                            Comment


                            • #15
                              Sorry, yesterday I've tried Widcomm 1.4.2.1 drivers. With 1.4.3.4 I have the same problems like with 4.0.1.7. Bluescreen......
                              With the 1.4.2.1 everything is working fine. SMS, outgoing calls + headset by pc. But I still have problems by incoming calls. There only noise comes out of my speakers. Perhaps it has to do with the older Widcomm drivers, but newer doesn't working in my carpc (I have tried two different bt dongles).
                              I have no more ideas to get confident with phoco

                              Winni

                              Comment

                              Working...
                              X