Announcement

Collapse
No announcement yet.

Widcomm 4.0.1.1500

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Widcomm 4.0.1.1500

    Final Update
    Hi there
    Shortly want to mention that all downloads concerning the Widcomm Stack are offline right now!
    Reasons are mentioned here.

    THX
    Chaos


    UPDATE4! UPDATE4! UPDATE4! UPDATE4! UPDATE4! UPDATE4! UPDATE4! UPDATE4!
    I made a mistake, before downloading, go into the SVCPACK directory and correct the spelling of one DLL file, it should be: BTneighborhood.dll it's American spelling which I failed to notice.
    I am uploading a corrected version as I write this, Chsos will be along soon with the new URL and I will update this post yet again!
    If you have already installed, then you will need to rename the existing BTneighborhood.dll in Windows\System32 to something else, then copy in the patched version from the svcpack directory, making sure to correct the spelling as you do so!, then reboot.

    Once again, apologies for the inconvinience. My replacement HD arrived the other day so I have been able to test this properly now and it is working.

    UPDATE3! UPDATE3! UPDATE3! UPDATE3! UPDATE3! UPDATE3! UPDATE3! UPDATE3!
    Prepatched 4.0.1.2101 installer - here
    Thanks to Chaos_666 for hosting the files
    Thanks to BillyX on another forum for cracking the files.
    Installer patched by me

    This version includes the High Quality Audio profile which is not in previous versions. Enjoy.

    UPDATE2! UPDATE2! UPDATE2! UPDATE2! UPDATE2! UPDATE2! UPDATE2! UPDATE2!
    Widcomm 4.0.1.2101 - here
    Patch - here

    Installation instructions are the same as for the initial post, not the pre-patched version immediately below.

    I have not tested this yet as I am still downloading 2100 myself, but apparently this version supports the high quality audio profile. Enjoy

    UPDATE! UPDATE! UPDATE! UPDATE! UPDATE! UPDATE! UPDATE! UPDATE!
    Click here for Widcomm 4.0.1.1500.Patched This download is already patched. Just install like a normal program, no need for copying files in safe mode or anything.
    Thanks to Chaos_666 for providing the hosting for this file.
    Note that I have not done anything with the .inf file. If you need this, then you can probably use the one from 4.0.1.700

    Original post here - the patch is no-longer needed unless you already downloaded 4.0.1.1500 from another location
    Widcomm 4.0.1.1500 - here
    Patch - here

    1) Unzip Widcomm installer
    2) Unzip the patch into the SVCPACK directory within the Widcomm installer directory.
    3) If you have done this correctly then it should ask you to confirm that you want to overwrite SVCPACK.INF, say yes
    4) Install as normal. The files will be automatically patched by the installer.

  • #2
    404 not found for the patch link
    Dr. Ron Paul for President 2008

    Hope for America - http://www.ronpaul2008.com

    Who is Ron Paul? - Why do we need Ron Paul?

    __________________
    CarPC Newbs Start Here: All your questions answered, as if by E.S.P.

    Comment


    • #3
      Link corrected now. Sorry

      Comment


      • #4
        Thank you much! =)
        Dr. Ron Paul for President 2008

        Hope for America - http://www.ronpaul2008.com

        Who is Ron Paul? - Why do we need Ron Paul?

        __________________
        CarPC Newbs Start Here: All your questions answered, as if by E.S.P.

        Comment


        • #5
          whats this one do??

          Comment


          • #6
            Funny, after I get 36.5 MB (of 37 MB) this site disappeared.

            www.ccandc.com.tw : 61.222.135.18
            www.ccandc.com.tw : ** no reply 00001 after 5 seconds

            And also, what is new?

            Comment


            • #7
              I have no idea what is new other than it actually works on my laptop unlike the last version (though the last version did run fine on my Car PC before the HD died). Bluetooth Imaging may be new or I just might not have noticed it before.

              Site seems to be back up now though. I guess too many people from here swamped it

              On which note, it would be nice if someone can mirror the patch file before I exceed my own bandwidth limits

              Comment


              • #8
                Is someone else able to host the main file as i keep getting part way thru then it fails!
                Epia M10k, 1GB RAM, 40GB HDD, 7" Touch, DVD-RW Drive, Bluetooth, GPS, GPRS, all neatly hidden away in my Audi S2

                Comment


                • #9
                  thanks for the links

                  In SVCPACK.ZIP there isn't a .inf file. Can we use the same we used with version 4.0.1.700?

                  Comment


                  • #10
                    I shall apply the patch to the installer and upload the entire thing as one .ZIP when I get home from work in a few hours for those of you who cannot download. Someone please mirror this as my ISP is going to kill me if 1000s of you all download a 40meg file off me! I will be taking it down after a few days.

                    You can problably use the old .inf file, I have not tested this as my dongle works with the default Widcomm .inf

                    Let me know how you get on with it, and also how you get on with this new-style patch. You can still patch via the old safe mode method if this style of patching fails (just ignore the svcpack.ini file)

                    Comment


                    • #11
                      I'm getting a licensing error message since installing this version (using D-Link DBT-120).

                      I need to play around with it some more, but does the error indicate an issue with the patch or .inf?
                      Dr. Ron Paul for President 2008

                      Hope for America - http://www.ronpaul2008.com

                      Who is Ron Paul? - Why do we need Ron Paul?

                      __________________
                      CarPC Newbs Start Here: All your questions answered, as if by E.S.P.

                      Comment


                      • #12
                        Hi there,
                        Originally posted by Lum
                        I shall apply the patch to the installer and upload the entire thing as one .ZIP when I get home from work in a few hours for those of you who cannot download. Someone please mirror this as my ISP is going to kill me if 1000s of you all download a 40meg file off me! I will be taking it down after a few days.

                        You can problably use the old .inf file, I have not tested this as my dongle works with the default Widcomm .inf

                        Let me know how you get on with it, and also how you get on with this new-style patch. You can still patch via the old safe mode method if this style of patching fails (just ignore the svcpack.ini file)
                        You can upload it to my webspace if you want, so anybody can download it.
                        Just drop me a PM.

                        THX
                        Chaos

                        Comment


                        • #13
                          Originally posted by tj!2k4
                          I'm getting a licensing error message since installing this version (using D-Link DBT-120).

                          I need to play around with it some more, but does the error indicate an issue with the patch or .inf?
                          How did you apply the patch? The 5 files should be put inside the SVCPACK folder in the Widcomm installer directory. If you have gotten it correct you will be asked if you want to overwrite the existing SVCPACK.INI file.

                          Since you have already installed, you may as well patch using the old method, boot into safe mode and overwrite btneighbourhood.dll and wbtapi.dll in winnt\system32 then overwrite btstackserver.exe and bttray.exe in program files\bluetooth

                          Chaos_666: Thanks for the offer. I'll upload the file to mine when I get in (I am not uploading 40megs over GPRS!), if you could just copy it to your site and provide the URL that will be fantastic.

                          Comment


                          • #14
                            thanks, missed the fact that the patched files need to be in the SVCPACK subdirectory.

                            Thanks.
                            Dr. Ron Paul for President 2008

                            Hope for America - http://www.ronpaul2008.com

                            Who is Ron Paul? - Why do we need Ron Paul?

                            __________________
                            CarPC Newbs Start Here: All your questions answered, as if by E.S.P.

                            Comment


                            • #15
                              Hi there
                              Originally posted by Lum
                              Chaos_666: Thanks for the offer. I'll upload the file to mine when I get in (I am not uploading 40megs over GPRS!), if you could just copy it to your site and provide the URL that will be fantastic.
                              This is possible, but due to my little upload-speed (128k), this could last.
                              So (not sure how fast Inet in England is) if yours is faster it might be easier if you could put it there.

                              THX
                              Chaos

                              Comment

                              Working...
                              X