Announcement

Collapse
No announcement yet.

How to set up for Map Monkey

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to set up for Map Monkey

    I must first start off by saying how impressed I am with this interface using frodo.
    I used voice recognition many moons ago and to be honest it wasnt that good at all, so it was something of a suprise to see how responsive it is.
    Anyway what im having trouble with doing is setting navivoice with map monkey.
    in the HTM the following statement is included:

    "What is dest_port=9913?

    This is for Destinator3. You have to set this to the same port as Destinator, and also enable the Winsock port in Destinator."

    Is destinators port always 9913? if not how do I find this? And also where do I find the Winsock Port?
    When these items are configured should Mapmonkey work OK?

    Not knowing much about creating commands does anyone know if it can be configured to use Phone Control?

    Any help will be greatfully received.

    P.S. what INI files do I need to configure new comands? the only INI files where in the download where gammacontrol & navivoice.

  • #2
    Originally posted by GARB-E
    I must first start off by saying how impressed I am with this interface using frodo.
    I used voice recognition many moons ago and to be honest it wasnt that good at all, so it was something of a suprise to see how responsive it is.
    Anyway what im having trouble with doing is setting navivoice with map monkey.
    in the HTM the following statement is included:

    "What is dest_port=9913?

    This is for Destinator3. You have to set this to the same port as Destinator, and also enable the Winsock port in Destinator."

    Is destinators port always 9913? if not how do I find this? And also where do I find the Winsock Port?
    When these items are configured should Mapmonkey work OK?

    Not knowing much about creating commands does anyone know if it can be configured to use Phone Control?

    Any help will be greatfully received.

    P.S. what INI files do I need to configure new comands? the only INI files where in the download where gammacontrol & navivoice.
    What you found out is the archaic way of connecting to MM. The option still exists to configure the port, but there is nothing left that can access it I'm not gonna have that option in the next version.

    You need to enable plugins in MM.

    If you want phone control support, then send me a GSM phone. i'm currently stuck with sprint till the summer

    The voice commands are in the XML file. The voice response is in the navivoice.ini file. Gammacontrol is the gamma file
    PowerVoice v1 | NaviVoice Source
    GammaControl v2.4
    SKINbedder v3

    1995 Lexus SC300

    Comment


    • #3
      Thanks for the responce but im still a little lost with setting up new commands.
      Below is the contents of the navivoice ini file:

      [settings]
      VoiceNumberDefault=7
      VoiceNumberMale=0
      Engine=AGENT
      VoiceNumberFemale=7
      WAV_FORMAT=0
      ShowOnLoad=0
      MinimizeToTray=0
      ShowBalloon=0
      PauseWhenTalk=0
      dest_port=9913
      Cd_Drive=D
      interval=10000
      commport=1
      listening=0
      Voice=1

      What i dont understand is that in the HTM file you talk about opening the INI file and then "go to programs place". From above you can see there is no content for programs place! What do I need to do??????

      Comment


      • #4
        Originally posted by GARB-E
        Thanks for the responce but im still a little lost with setting up new commands.
        Below is the contents of the navivoice ini file:

        [settings]
        VoiceNumberDefault=7
        VoiceNumberMale=0
        Engine=AGENT
        VoiceNumberFemale=7
        WAV_FORMAT=0
        ShowOnLoad=0
        MinimizeToTray=0
        ShowBalloon=0
        PauseWhenTalk=0
        dest_port=9913
        Cd_Drive=D
        interval=10000
        commport=1
        listening=0
        Voice=1

        What i dont understand is that in the HTM file you talk about opening the INI file and then "go to programs place". From above you can see there is no content for programs place! What do I need to do??????
        I update the file with the proper INI. Sorry. But download the INI below.
        Attached Files
        PowerVoice v1 | NaviVoice Source
        GammaControl v2.4
        SKINbedder v3

        1995 Lexus SC300

        Comment


        • #5
          Cheers 0l33l, now it all makes sense to me!!!

          Now I know how config stuff to call up other progs, but how do I configure navi to run selected items within a program, such as the mobile icon on phonecontrol?

          Comment


          • #6
            Originally posted by GARB-E
            Cheers 0l33l, now it all makes sense to me!!!

            Now I know how config stuff to call up other progs, but how do I configure navi to run selected items within a program, such as the mobile icon on phonecontrol?
            Use the Macros functions. Load up phonecontrol, then give navivoice its class name, and then figure out how you want it to be clicked.

            Unless you want me to code in phonecontrol support, but I'd need a GSM phone because PhoCo starts *****ing if I don't have anything
            PowerVoice v1 | NaviVoice Source
            GammaControl v2.4
            SKINbedder v3

            1995 Lexus SC300

            Comment


            • #7
              Originally posted by 0l33l
              Use the Macros functions. Load up phonecontrol, then give navivoice its class name, and then figure out how you want it to be clicked.

              Unless you want me to code in phonecontrol support, but I'd need a GSM phone because PhoCo starts *****ing if I don't have anything
              Wo slow down down, macros! class names!! your talking to a nooooooob
              can you please elaberate or do a step by step guide? Or possibly a link to try to understand a little more how to set it up. I have read the htm but i do not understand how to obtain the key commands to input them into the xml and ini files. From looking at the other threads it seems u need something called an API spy? I have tried downloading a few but cant seem to get them working!
              Any reccomendations?

              Cheers

              P.S. Cant really help you out with a new phone? Sorry

              Comment


              • #8
                Originally posted by GARB-E
                Wo slow down down, macros! class names!! your talking to a nooooooob
                can you please elaberate or do a step by step guide? Or possibly a link to try to understand a little more how to set it up. I have read the htm but i do not understand how to obtain the key commands to input them into the xml and ini files. From looking at the other threads it seems u need something called an API spy? I have tried downloading a few but cant seem to get them working!
                Any reccomendations?

                Cheers

                P.S. Cant really help you out with a new phone? Sorry
                API Spy is attached. Enter the window class into something like program_title406=

                There are a few examples of Macros already in the INI file, like the program_close ones.

                No whone, no phoneco support
                Attached Files
                PowerVoice v1 | NaviVoice Source
                GammaControl v2.4
                SKINbedder v3

                1995 Lexus SC300

                Comment


                • #9
                  Nice one, Ill give this a try when I get back from work

                  Comment


                  • #10
                    Originally posted by GARB-E
                    Nice one, Ill give this a try when I get back from work
                    PowerVoice v1 | NaviVoice Source
                    GammaControl v2.4
                    SKINbedder v3

                    1995 Lexus SC300

                    Comment

                    Working...
                    X