Announcement

Collapse
No announcement yet.

Navi Voice wont respond

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Navi Voice wont respond

    HI well now there is a new problem here.
    Earlier all was well and fine
    but now when i try to run navi voive i do see the ICON in the tray but nbow it has stopped responding to all commands,,,,
    as a matter of fact it does not respond to the command BORIS.
    I call boris and --------- nothing happens...
    tried to reload the navi voice all to gether but still the same

    any help pls...
    thanx in advance

    vicky
    Commell LV-677 DC 6 x 6" Mother Board
    2.6 GHz; 1 Gb Ram
    120 Gb Laptop HD
    7" InDash Xenarc MTD - X7000 Screen
    Gyration Mouse ; GPS Mouse ; ELM Scan ; TPMS
    Parrot MK 6000 & iPhone
    ----------
    Re done the carputer...Into the Glove Box !!

  • #2
    Hmmm.... maybe your SAPI got reset for some reason. Maybe you turned off recognition? Or did you change the Boris to somethign else?
    Does the log in NV do anything when you speak?
    Microphone got unplugged?
    PowerVoice v1 | NaviVoice Source
    GammaControl v2.4
    SKINbedder v3

    1995 Lexus SC300

    Comment


    • #3
      No not that i can notice.. SAPI is still there. Recognition is ON ( from the form ) and the BORIS command is still there...
      the NV log ( in the form ) does make a few notes like,....

      OnSoundStart
      OnSoundEnd
      OnPhraseStart
      21
      OnSoundEnd


      and so the pic is still pluged in

      any help pls
      Commell LV-677 DC 6 x 6" Mother Board
      2.6 GHz; 1 Gb Ram
      120 Gb Laptop HD
      7" InDash Xenarc MTD - X7000 Screen
      Gyration Mouse ; GPS Mouse ; ELM Scan ; TPMS
      Parrot MK 6000 & iPhone
      ----------
      Re done the carputer...Into the Glove Box !!

      Comment


      • #4
        This happens on my system sometimes. I'm using BSR but I bet it's the same issue. The SAPI just goes on vacation every now and then. After a couple of minutes, it comes back. It's probably something to do with a Via system rather than NaviVoice.
        Originally posted by ghettocruzer
        I was gung ho on building a PC [until] just recently. However, between my new phone having internet and GPS and all...and this kit...Im starting to have trouble justfiying it haha.
        Want to:
        -Find out about the new iBug iPad install?
        -Find out about carPC's in just 5 minutes? View the Car PC 101 video

        Comment


        • #5
          Originally posted by Bugbyte
          This happens on my system sometimes. I'm using BSR but I bet it's the same issue. The SAPI just goes on vacation every now and then. After a couple of minutes, it comes back. It's probably something to do with a Via system rather than NaviVoice.
          Glad other programs have the same errors

          What I'd do is train SAPI at one more reading. I think it should come back after that. Also restart the computer maybe.
          PowerVoice v1 | NaviVoice Source
          GammaControl v2.4
          SKINbedder v3

          1995 Lexus SC300

          Comment


          • #6
            Originally posted by vicky_obee
            Navi Voice wont respond
            You have to stroke it gently and speak in a soothing voice.
            She likes that.
            [H]4 Life
            My next generation Front End is right on schedule.
            It will be done sometime in the next generation.
            I'm a lesbian too.
            I am for hire!

            Comment


            • #7
              Originally posted by frodobaggins
              You have to stroke it gently and speak in a soothing voice.
              She likes that.
              PowerVoice v1 | NaviVoice Source
              GammaControl v2.4
              SKINbedder v3

              1995 Lexus SC300

              Comment


              • #8
                OK its no the case ONLY with VIA mobo.. I have tried on ORIGINAL Intels mobo as well. The comp stops to the SOOTHING command of BORIS and just sleeps there till it feels like..
                1 thing i could see is that before this happens the Navi VOice FORM opens and thats the END of EVERTHING.. It stops responding...
                any help pls.....
                Commell LV-677 DC 6 x 6" Mother Board
                2.6 GHz; 1 Gb Ram
                120 Gb Laptop HD
                7" InDash Xenarc MTD - X7000 Screen
                Gyration Mouse ; GPS Mouse ; ELM Scan ; TPMS
                Parrot MK 6000 & iPhone
                ----------
                Re done the carputer...Into the Glove Box !!

                Comment


                • #9
                  Delete your SAPI profile or start a new one.
                  PowerVoice v1 | NaviVoice Source
                  GammaControl v2.4
                  SKINbedder v3

                  1995 Lexus SC300

                  Comment


                  • #10
                    Well I did try to del the SAPI and try to redo it.. but still no luck .. it starts fine but as soon as the FORM opens all DEAD... and more over it dosent recognise the Numbers and a few ALFABETS...
                    Commell LV-677 DC 6 x 6" Mother Board
                    2.6 GHz; 1 Gb Ram
                    120 Gb Laptop HD
                    7" InDash Xenarc MTD - X7000 Screen
                    Gyration Mouse ; GPS Mouse ; ELM Scan ; TPMS
                    Parrot MK 6000 & iPhone
                    ----------
                    Re done the carputer...Into the Glove Box !!

                    Comment


                    • #11
                      Originally posted by vicky_obee
                      Well I did try to del the SAPI and try to redo it.. but still no luck .. it starts fine but as soon as the FORM opens all DEAD... and more over it dosent recognise the Numbers and a few ALFABETS...
                      For numbers, replace the numbers with the spelling of the numbers. Change the sensitivity to get rid of most of the false alerts.
                      PowerVoice v1 | NaviVoice Source
                      GammaControl v2.4
                      SKINbedder v3

                      1995 Lexus SC300

                      Comment


                      • #12
                        Well that may be can work out but the basic question is Y does it not always respond to the BORIS command.. I di dtry to uninstall and redo the SAPI and the software .. BUt still the same result.. it works for a few mts and then its dead again...
                        any suggestions PLS........
                        Commell LV-677 DC 6 x 6" Mother Board
                        2.6 GHz; 1 Gb Ram
                        120 Gb Laptop HD
                        7" InDash Xenarc MTD - X7000 Screen
                        Gyration Mouse ; GPS Mouse ; ELM Scan ; TPMS
                        Parrot MK 6000 & iPhone
                        ----------
                        Re done the carputer...Into the Glove Box !!

                        Comment


                        • #13
                          Originally posted by vicky_obee
                          Well that may be can work out but the basic question is Y does it not always respond to the BORIS command.. I di dtry to uninstall and redo the SAPI and the software .. BUt still the same result.. it works for a few mts and then its dead again...
                          any suggestions PLS........
                          I have no clue. I didn't write SAPI
                          PowerVoice v1 | NaviVoice Source
                          GammaControl v2.4
                          SKINbedder v3

                          1995 Lexus SC300

                          Comment

                          Working...
                          X