Announcement

Collapse
No announcement yet.

CNX-P2140 Overview and Installation Video: Information Overload Beta p1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • CNX-P2140 Overview and Installation Video: Information Overload Beta p1

    **Goal
    Demonstrate what all the input and output wires (J1 and J2) on the P2140 do and where to connect them. We'll also provide a quick overview of the jumpers that control how your primary and secondary output rails behave.

    **Learn
    How to quickly wire and configure the P2140.

    **Equipment
    Screw driver, electrical tape, multimeter (optional), wire strippers, p2140

    **Next Time
    How to splice your AC/DC brick to power your laptop/mini computer.


  • #2
    Thank you! This is extremely helpful. I purchased the P2140 over a year ago, and I'm continually impressed by the amount of features packed into this device. This video guide is very useful and I can't wait to see more.

    Comment


    • #3
      Nice work,

      Looking forward for more info on the P2140.

      Comment


      • #4
        Thanks! We'll keep them coming. If there is anything in particular you'd like to see/hear more about let us know (post or PM) and if we can make it happen we will.

        Comment


        • #5
          I can't think of any thing that would need to be demonstrated on video. I have some technical questions that can be answered on forums. Just watching the video gives me a lot more confidence in what I'm doing.

          Comment


          • #6
            Perhaps:

            - How to add a master switch (i.e. if on allows PC to Boot when ignition active, if off then will not allow boot).
            - How to connect an external PC/Mac on/off switch
            - How to use the acpi / isense wires from the P2140 to the PC/MAC

            Comment


            • #7
              Originally posted by SoulR View Post
              Perhaps:

              - How to add a master switch (i.e. if on allows PC to Boot when ignition active, if off then will not allow boot).
              Or better yet a three-way switch (ON-OFF-AUTO) for always on;always off; and switched w/ignition.
              HARDWARE: Fujitsu Stylistic ST5111w/WiFi and dock, internal Hitachi 500G HD, external 1TB HD, Sierra Wireless Aircard 550, DVD-RW, BoomzBox HD radio, XM Commander, Delorme GPS, Saitek X-52 Pro joystick, BluSoleil Bluetooth, TPMS, FB, Elm327

              Comment


              • #8
                Thanks for the feedback everybody. Keep it coming.

                Originally posted by SoulR View Post
                Perhaps:
                ....
                - How to connect an external PC/Mac on/off switch
                - How to use the acpi / isense wires from the P2140 to the PC/MAC
                Originally posted by GizmoQ View Post
                Or better yet a three-way switch (ON-OFF-AUTO) for always on;always off; and switched w/ignition.
                So, I will add some ACPI videos to the list and also using a three-way switch.

                Comment


                • #9
                  HI can anyone elaborate on JP6 and the acpi / isense wires from the P2140 to the PC/MAC?

                  Originally posted by SoulR View Post
                  Perhaps:

                  - How to add a master switch (i.e. if on allows PC to Boot when ignition active, if off then will not allow boot).
                  - How to connect an external PC/Mac on/off switch
                  - How to use the acpi / isense wires from the P2140 to the PC/MAC

                  Comment

                  Working...
                  X