Announcement

Collapse
No announcement yet.

Ai10: controller for Apline AiNet

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ai10: controller for Apline AiNet

    Let me introduce my controller for different AiNet peripherals called Ai10. Initially is has been developed to let my other in-car controller to adjust major settings of Alpine PXA-H701 processor. However I tried to keep the board and firmware quite flexible for different hardware setups. Ai10 is controlled over RS232 (COM) or UART serial interfaces. It also could be connected to modern PCs thru various USB->COM adapters.
    Ai10 allows to monitor AiNet bus and send any packets to AiNet. Current firmware also has built-in commands for major PXA-H700/701 or MRA-F350 settings (volume/balance/fader/sub. kevel/input select) and AiNet CD Changers controls (change disk/track, play/pause).
    Boars schematics and firmware source are opened for community and available for download on Project Ai10 page https://sites.google.com/site/projai10/
    Further details about Ai10 project posted in this thread: http://www.mp3car.com/car-audio/1286...-solved-4.html

  • #2
    I love the project whose the sources are opened !
    It's a great project !

    Comment


    • #3
      Thank you. Hope that someone will join and contribute the project.

      Comment


      • #4
        Would this allow allow me to use a MRA-F350 with a carpc? I'm wanting to use the optical out on my computer, but I can't seem to find a straight answer on this. That amp has the 17 band EQ that is controlled by the compatible headunits which also tell it when to turn on (no remote wire).

        Comment


        • #5
          Originally posted by zreon View Post
          Would this allow allow me to use a MRA-F350 with a carpc? I'm wanting to use the optical out on my computer, but I can't seem to find a straight answer on this. That amp has the 17 band EQ that is controlled by the compatible headunits which also tell it when to turn on (no remote wire).
          MRA-F350 is supported as mentioned here:
          http://www.mp3car.com/vbulletin/car-...ml#post1441461
          http://www.mp3car.com/vbulletin/car-...ml#post1443521

          Ai10 would allow you to turn this amp on/off, set the volume and change the inputs. 17 band EQ is not supported yet, but you could borrow the HU to set up and store it.

          Comment


          • #6
            Does it possible to command the AINet interface by a RideRunner plugin in VB.NET . If yes what is my needs !

            Comment


            • #7
              Nik1976-

              I sent you an email from the Ai10 site as your mp3Car PM inbox was full. I am interested in obtaining one of your PCBs if you still have any available. Feel free to contact me when you have some time. Thanks for your hard work and dedication to this project!

              -Highly

              Comment


              • #8
                Hi Nik1976,
                Does exist a way to use this interface with a cda9835r for have an usb interface that read usb key or disk with mp3 files ?

                Comment


                • #9
                  Hi, do you have controllers for sale?

                  Comment


                  • #10
                    probably a little late on this and not quie understanding it all. but is anything still available from you? like boards, schematics, ect. so i can get a printed board and parts from digikey and make a controller. Id love to be able to control the 701 through your controller and a usb connection.

                    Comment


                    • #11
                      Schematics and firmware source code are published on https://sites.google.com/site/projai10/
                      I have one board left for sale, PM me if you needs it

                      Comment


                      • #12
                        sent a pm, very interested in a board. pm a reply and ill get the money to get one sent out . I wasnt able to view the files for the board or the schematic, they seem to be almost files from another program. do i need to download another program to view them? just want to get a board asap and the parts list so i can build it and get it goin. ten hopefully a ai net amp or audio processor to use as a pre amp for my car pc without having to use a head unit.

                        Comment

                        Working...
                        X