Announcement

Collapse
No announcement yet.

Series

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Series

    When you wire speakers in series, you add up the total ohm load. For instance, if you have two 4 ohm speakers wired in series, your total ohm load is then 8 ohms. If you have three 4 ohm speakers wired in series, your total ohm load is 12 ohms.

    The wiring for this will be as follows:


    Lets say you have four 4 ohm speakers that you need to wire in series, this would give you a total ohm load of 16 ohms.

    The wiring for this will be as follows:


    The equation for this is as follows:

    Ztotal = Zspeaker a + Zspeaker b + ... + Z speaker z
Working...
X