LinkBack URL
About LinkBacks
Reply With QuoteBut have you figured out how to import ProjectEZP speedtraps so the system warns you when approaching U.S speed traps?
Oops, I know this was off topic but I couldn't help myself. THE DEVIL MADE ME DO IT.
ok.. I forgot to mention how they work
At the moment the cameras are loaded into D3 every 5 minutes, you may see a screen flash when its doing this, or if theres alot of cameras in a 10km radius to you it may disappear for a second. This should be resolved when I figure out how D3 makes there dat files up, but until then this was the only way it could be done.
The number of cams showing in the top left is how many cams are in the 10km radius, this will change every 5 mins as you move and they update. As you drive along if the alert starts, Freedrive then enters the alertmode status, this status lasts as long as your moving towards the camera, so if you stop say at traffic lights, the alert will stop as your not getting closer anymore. To turn off the camera voice alert whilst its going on, just tap the screen once, to turn off the visual alert (flashing) tap the screen again. On the third tap if your using a menutouch skin then the menu will appear. A women will confirm the alert status on screen tap.
I will be improving on this by making the women say what type and speed the camera is and also may increase the beeps the closer you get.
Thats about it really.. A few things I want to change but you wont notice them, only the way i've coded stuff.. anyway let me know what you think
cheers
CdR
But have you figured out how to import ProjectEZP speedtraps so the system warns you when approaching U.S speed traps?
Oops, I know this was off topic but I couldn't help myself. THE DEVIL MADE ME DO IT.
had a quick look, i'm not a member but they say that there GPSBabel Generic CSV
is in the format longitude, latitude, name which is the same format as I'm already using.. would you mind posting a line from one of there csv files so I can confirm if its in the correct format or not.. If it isnt I will make a convertor, but chances are it will be :-)
let me know
CdR
I would think you can use the csv file......CdR will elaborate I'm sure...Originally Posted by GizmoQ
But have you figured out how to import ProjectEZP speedtraps so the system warns you when approaching U.S speed traps?
Oops, I know this was off topic but I couldn't help myself. THE DEVIL MADE ME DO IT.
Microsoft Pinpoints Format
Downloaded archive includes ProjectEZP.csv file. The file contains "pinpoints" of the locations in the following format: longitude, latitude, "name".
*Edit* You're too quick m8...
.
Old setupEpia M10k, Cubid 2699R case, 512MB, 40GB 3.5" driveNew setup
Optiplex 260SX (2.8GHz P4, 512MB, 30GB, DVD)
Xenarc 700IDT, USB hub, 802.11g, bluetooth, P2140, P5V
:-) thats what the wife says....
Example ProjectEZP.csv lines:
34.03646 -111.36755 AIRP_Q7Q 1000
36.80285 -118.19985 AIRP_Q9Q 2000
35.0584 -119.39761 AIRP_W28 100
47.01629 -120.60542 AIRP_W38 100
36.19573 -121.09521 AIRP_WF8 100
44.78145 -69.08086 AIRP_WM8 100
25.69534 -80.32511 AIRP_QIQ 2000
25.68239 -80.35559 AIRP_WN8 100
40.10369 -82.94082 AIRP_QZQ 2000
30.47847 -84.14044 AIRP_3BY 100
I believe these are long, lat, name, kill zone
unsure what a killzone is.. but if you import that into freedrive using the importer.. it should load up fine.. you wont have any speed settings for the cameras but the positions will show up on the map and you will get a warning.. give it a go please and let me know
cheers
CdR
Kill zone is probably range of radar/laser/area of speed trap.
Thanx
"killzone" is the radious in meters (yards) around speedtrap, where warning is issued.
ProjectEZP.com – next generation police speedtrap locator. Free database for your GPS system (includes US/Canada).
Posting Permissions
Bookmarks