LinkBack URL
About LinkBacks
Reply With QuoteCheck that the port hasn't changed, mine did this once. If you have moved the port the GPS receiver is plugged into this is probably the case. Does free drive show any satellites are locked?
Hello, i just started using freedrive in road runner...i know that my gps reciever is on port 4. I go to the settings and hit connect and it finds the gps...but i dont think its working..because i'll be driving and it doesnt move with me. The first time i set it up it found me in my driveway...but now i'll be in a different town..and it will still show me infront of my house. It also is able to route my destinations...but its not showing anything. Anyone know what i can do?
thanks
Jason
Check that the port hasn't changed, mine did this once. If you have moved the port the GPS receiver is plugged into this is probably the case. Does free drive show any satellites are locked?
Visit my site V8 Scimitar
SP13000, 300GB SATA HD, 1GB DDR. Opus 150, K301 screen, Cisco WIFI, AQmax GPS, RoadRunner and FreeDrive, Sony MEX-R5 head unit. 4 years installed and it just keeps running!
Didn't you know? The world revolves around your drive way.
Avengerki
PC Install: 85%
Car PC: Revo-Sys X300 Double Din: 1.3GHz Pentium
Software install and setup: 35%
Entertainment Package: 85%
...thanks for the inputOriginally Posted by avengerki
Check to make sure you haven't got it set to planning mode. If you have then set it to navigation mode.
Only true postwhores remember everything they post
REP CLUB IS DEAD
LONG LIVE REP CLUB
make sure you haven't set the GPS port in RoadRunner to port 4.
Posting Permissions
Bookmarks