Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Building Fusion Brain FAQ -- Need Questions

  1. #1
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    10,045

    Building Fusion Brain FAQ -- Need Questions

    We are putting together a new FAQ/Help section and we would like some input on questions to put in there. Also headings.

    Currently the headings are:

    General
    Hardware
    Software
    Skin Designer


    I think maybe an Installation tab may be helpful. Any others?

    Then for the meat of it, what sort of questions have you had about this? Post the question, and if it is good for a FAQ type, then we will add it.

    Here is the current FAQ area: http://www.fusioncontrolcentre.com/F...lp.php?faq=All

    Please note that no questions will actually be answered in this thread. This is just to ask questions that might be helpful for a FAQ. If you need an answer to a question, please make a new thread. Thankyou.
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store

  2. #2
    FLAC
    Join Date
    May 2006
    Location
    Calgary, Alberta
    Posts
    1,718
    Oh, I got a few of these. Reserved.

    Quote Originally Posted by 2k1Toaster View Post
    You fall asleep there?
    Ya, went to bed while visions of gumdrops and Fusions danced in my head.

    I was trying to think of all the questions I want answered but you got most of them already. The ones I had were how it connects to the computer. Which kind of wire is it? How does the USB cable connect to the board? Do I have to buy the USB cable separately or does it come with the basic board purchase? Then I asked how it connects to my electrical item of choice. Which kind of wire is used for this? How does this wire connect to the board? Does it require a relay between the wire and electrical item? I think that's it. A basic diagram like the audio one you got me yesterday would help immensely. It would show people the kind of wires connected on both sides and how they go into the board.

    EDIT - ha, now I can't delete my other post.
    Ampie Case
    2.5" Hard Drive 80GB Samsung 5400RPM
    256 MB DDR2 PC5400
    Xenarc 700TSV - VGA Monitor
    Intel D945GCLF Motherboard
    M2-ATX-HV

    2005 Honda Civic

  3. #3
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    10,045
    Quote Originally Posted by Maheriano View Post
    Oh, I got a few of these. Reserved.
    You fall asleep there?
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store

  4. #4
    Variable Bitrate
    Join Date
    Oct 2004
    Location
    Sydney, Australia
    Posts
    425
    I want to buy a Fusion Brain but I have no electrical knowledge, what are my options?

    Will Fusion Brain staff give me installation support if I need it?

    How do I integrate Fusion Brain into my front end?
    Continued Worklog... Upgrades in progress:
    *15.4" WXGA LED backlight touchscreen upgrade
    *Custom fiberglass dash bezel

  5. #5
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    10,045
    Quote Originally Posted by Maheriano View Post
    EDIT - ha, now I can't delete my other post.
    Spliced 'em for you.

    Quote Originally Posted by Maheriano View Post
    Oh, I got a few of these. Reserved.



    Ya, went to bed while visions of gumdrops and Fusions danced in my head.

    I was trying to think of all the questions I want answered but you got most of them already. The ones I had were how it connects to the computer. Which kind of wire is it? How does the USB cable connect to the board? Do I have to buy the USB cable separately or does it come with the basic board purchase? Then I asked how it connects to my electrical item of choice. Which kind of wire is used for this? How does this wire connect to the board? Does it require a relay between the wire and electrical item? I think that's it. A basic diagram like the audio one you got me yesterday would help immensely. It would show people the kind of wires connected on both sides and how they go into the board.
    Ok, will do. Sometimes as a designer you forget if you mentioned the little things with enough importance like if it is USB or not... Will be added.
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store

  6. #6
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    10,045
    I spliced it into seperate FAQ and Tutorial tables, and will have a checkbox/button (suggestions/ideas on a good look or style for this?) to show either/or or both. Right now they are both displayed and "there aint nothin' you can do about it".

    This is stepping up to a section where users such as you people can create your own tutorials upload them, and have them display on the page. I think those that use this product will be reputable and not abuse this. I think I may have to restrict this feature of posting to customers who are logged in to prevent random postings... But I hope it is coming soon.
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store

  7. #7
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    10,045
    Got this idea from another thread, but perhaps a difficulty rating for the tutorials?

    Would that be something of interest?
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store

  8. #8
    Newbie The_Rocket's Avatar
    Join Date
    Sep 2006
    Location
    Norway
    Posts
    30
    What is the unused pins (jumpers) used to?
    How do I integrate my own sensors with only 2 wires?
    2000 Ford Focus - Worklog

  9. #9
    Constant Bitrate
    Join Date
    Jul 2005
    Posts
    221
    i think u guys def. need a birds eye pic of the board showing all the port names and numbers..

    i havnt really looked at mine since i got it, will do when i need it, but this is something that would make life alot easier

  10. #10
    Fusion Brain Creator
    Join Date
    Mar 2005
    Posts
    2,221
    Check the User Manual on the website.

Page 1 of 2 12 LastLast

Similar Threads

  1. questions before I start building
    By DJKOK in forum General Hardware Discussion
    Replies: 6
    Last Post: 12-10-2005, 10:42 AM
  2. Newbie Questions... Building my system
    By Fender2Martin in forum Newbie
    Replies: 3
    Last Post: 05-15-2004, 12:25 AM
  3. noob questions, can't find a FAQ
    By grog in forum ME Archive
    Replies: 2
    Last Post: 05-31-2003, 11:55 PM
  4. Building ATX DC-DC PS. Got questions...
    By Pred8tr in forum Power Supplies
    Replies: 2
    Last Post: 10-31-2002, 03:27 AM
  5. general questions about building
    By felix99 in forum General Hardware Discussion
    Replies: 1
    Last Post: 06-14-2002, 11:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •