Almera n16 pc
I would like to install a car pc in me vehicle, but i find one problem. As you can see on the pic below i already have a display (as far as i know vfd display) which shows all the data from climate control, outside temp, radio etc. I would like to remove it and put touch panel instead with car pc. The problem is how to get all those info from this display to a pc and then to a new display? i dont wan to control hvac with touch panel cause its done with a centre console which also operates radio. Any ideas, suggestions?
If you just want to display and not control, then that is a simple job. Each of those VFD or LCD segments has a pin. Or worst case it is a matrix. The logic would be to just check when that segment is told to go high, and then display whatever on screen what the combinations of segments light up.
well how to figure out if its a matrix or not? all i know from manual is that the display is connected to radio, combination meter, multi function switch and ac - auto amp and has 24 pins (if not mistaken) if its any help i can insert pics from manualAttachment 67474Attachment 67475Attachment 67476
thanx for any help