low profile PC2100 for Casetronics Travla c158

Printable View

03-02-2005, 09:05 AM
NJ_Jackals

low profile PC2100 for Casetronics Travla c158

MB is VIA EPIA M10000.

I'm looking for a place in the US to buy 512MB low profile RAM at a decent price. Height restriction is 1.125" for this case(c158).

A few other questions:
Do they make RAM at this height or do I need to get Ultra Low Profile (.8")
Can the RAM be registered, ECC with this MB?

-NJJ
03-02-2005, 10:25 AM
coach

cappuccinopc.com and I think logicsupply.com sells the .8" ram you asked. The 1.125" seems like as standard memory height, just check the specs on the manufacturers website to get exact heights. Ram for epia is unregistered non ECC for the most part, but I think it supports the more expensive ECC and registered modules just fine. Why pay more though?

Brent
03-02-2005, 10:51 AM
Curly_cat

You can fit standard RAM in the C158.

Choose Kinston ValueRAM and you'll never have any problems.
03-02-2005, 12:07 PM
NJ_Jackals

Quote:

Originally Posted by Curly_cat

You can fit standard RAM in the C158.

Choose Kinston ValueRAM and you'll never have any problems.

Really? I know you can fit standard RAM in the c138 but I didn't think you could in the c158. Specs say max ram hieght is 1.125". Standard RAM is 1.25.

http://206.14.132.88/products/Travla/c158/C158.html

How do you know? Just curious since you have a different case in your sig. Thanks for the input by the way. This could save me some $$.

-NJJ
03-02-2005, 12:11 PM
NJ_Jackals

Quote:

Originally Posted by coach

cappuccinopc.com and I think logicsupply.com sells the .8" ram you asked. The 1.125" seems like as standard memory height, just check the specs on the manufacturers website to get exact heights. Ram for epia is unregistered non ECC for the most part, but I think it supports the more expensive ECC and registered modules just fine. Why pay more though?

Brent

Thanks. Standard memory seems to be 1.25". I found a lot of "low profile" memory that was 1.2 and meant for servers (registered ECC). I've found ATP memory @ 1.15" but case specs say I need under 1.125". I'll check cappuccinopc.com. Thanks for the recomendation.

-NJJ
08-01-2005, 08:10 AM
kbyrd

Quote:

Originally Posted by NJ_Jackals

Thanks. Standard memory seems to be 1.25". I found a lot of "low profile" memory that was 1.2 and meant for servers (registered ECC). I've found ATP memory @ 1.15" but case specs say I need under 1.125". I'll check cappuccinopc.com. Thanks for the recomendation.

-NJJ

Where are you reading those specs? Logic supply says it's 1.25 restriction.
http://www.logicsupply.com/product_i...roducts_id/283