Page 4 of 13 FirstFirst 12345678910111213 LastLast
Results 31 to 40 of 127
Like Tree1Likes

Thread: Mini-ITX boards

  1. #31
    Newbie
    Join Date
    Aug 2006
    Posts
    7
    ok but KONTRON the 986CD-M/mITL
    1) How much coast this card mother?
    2) How much consumes in Watt?
    3) Where I can buy it in Europe?

  2. #32
    Maximum Bitrate
    Join Date
    Apr 2006
    Location
    Sydney, Australia
    Posts
    570

    Endura TP945GM

    I found this board which maybe interesting - anyone seen or tried it out?

    http://www.radisys.com/products/data...asheetsid=1202

    Endura TP945GM Data Sheet
    LONG LIFE MINI-ITX EXPRESS MOTHERBOARD BASED ON THE INTEL® MOBILe 945GM EXPRESS CHIPSET

    FEATURE SUMMARY
    Mini-ITX form factor 6.7” x 6.7”, 170mm x 170mm, 10-layer PCB!
    Intel® Core™ Duo, Celeron® M, LV and ULV processors
    Intel® 945GM Express chipset
    667/533MHz Front-Side Bus
    Two DIMM sockets
    Up to 4GB DDR2-667 memory
    Dual-Channel memory
    Intel® GMA950 Graphics
    x16 PCI Express graphics slot
    18-bit, dual channel LVDS
    TV-out header
    VGA output
    Dual independent displays
    Intel® High Definition Audio
    Eight channel CODEC for 7.1 audio
    S/PDIF digital audio output
    Mini-PCI Type lllA socket
    PCMCIA Type II socket
    Compact Flash Type I socket
    Single or dual Gigabit Ethernet
    Eight USB 2.0 ports
    Four RS-232 serial ports
    PS/2 keyboard and mouse ports
    IrDA interface
    Two SATA 1.5 Gbps ports
    One Ultra ATA100 port
    Phoenix TrustedCore™ BIOS
    TPM 1.2 header
    System monitoring
    Automatic fan speed control
    GPIO port
    ACPI 3.0
    RoHS compliant
    New Car PC Build list in progress

  3. #33
    Newbie
    Join Date
    Jul 2006
    Location
    pennsylvania
    Posts
    11
    Thanks.
    The Endura TP945GM looks interesting since I am seriously looking at the Aopen i945GTt. It looks like they have the same chip set. It would be nice to find an alternate to consider since I think the Aopen board is a little pricey. One concern I would have from the top is does this Endura board support core 2 duo merom. It uses the same socket but different voltage usually requires new bios.
    Jim (oldmadog)

  4. #34
    _
    Join Date
    Mar 2004
    Location
    Little Elm, Texas
    Posts
    13,500
    That board is 99.95% there for me!!! if only it had an optic out I'd be all over this board!

    Thanks for the info! I'll add it to the list.
    Jan Bennett
    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

    Please post on the forums! Chances are, someone else has or will have the same questions as you!

  5. #35
    Newbie
    Join Date
    Jul 2006
    Location
    pennsylvania
    Posts
    11

    Itox intel core duo G5C100-N-G

    I saw this board on www.epiacenter.com from www.itox.com.
    They have also anounced two core 2 duo conroe Atx and micro ATX boards.
    Sample quantities are available now.

    The G5C100-N-G has what seems to becoming a standard config - intel core 2 duo merom with i945G/ICH7m chipset. Two ethernet ports seem nice, but I am not sure what I will use the second for. I hope I didn't make any transposition errors or didn't forget to include key info, and I will double check with Itox to insure Core 2 Duo (Merom) support.
    I like what I see so far and definitely am going to consider it in my CarPC/Home entertainment sys

    A G5C100-N-G FEATURE SUMMARY follows:
    Mini-ITX form factor 6.7” x 6.7”, 170mm x 170mm, 6-layer PCB!
    Intel® Core™ Duo/Solo, Celeron® M processors
    Intel® 945GM Express chip set
    667/533MHz Front-Side Bus
    Two 200 pin SODIMM sockets Up to 4GB DDR2-667 memory
    Intel® Graphics
    1 PCI slot for PCI expansion card or customized riser
    card for 1, 2 or 3 PCI slots expansion
    1 Compact Flash socket
    Realtek ALC655 for 5.1 Audio
    S/PDIF digital audio output
    Dual Gigabit Ethernet 10/100/1G
    using two Marvell 88E8053 PCI Express Gigabit controllers
    Eight USB 2.0 ports - 4 rear panel
    Four RS-232 serial ports – 3 DB9 rear panel
    PS/2 keyboard and mouse ports
    IrDA interface
    Two SATA 1.5 Gbps ports
    Two IDE Devices - One Ultra ATA100 port
    Award™ BIOS – 4 Meg Flash

    Damage Free Intelligence
    watchdog timer
    CPU/System Temp, fan speed, CPU voltages and failure alarm
    GPIO port
    ACPI
    APM 1.2, RoHS compliant

    -------------------------------------------------
    i use a 200 MHZ Pentium II sys and 300 MHZ G5 Apple computer
    Badly in need of update

  6. #36
    _
    Join Date
    Mar 2004
    Location
    Little Elm, Texas
    Posts
    13,500
    added Kosti!

    Thanks again!
    Jan Bennett
    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

    Please post on the forums! Chances are, someone else has or will have the same questions as you!

  7. #37
    Maximum Bitrate Caelric's Avatar
    Join Date
    Sep 2005
    Location
    Bellevue, NE
    Posts
    834
    Hmm, has anyone been able to find that Kontron board, the 986LCD, available anywhere on-line (or in person) I've emailed their US sales office, but haven't heard back from them, and I haven't found it anywhere else, or available for purchase anywhere.

    Dave
    2005 Infiniti G35 6MT Coupe Black/Black
    Core Duo CarPC
    CarDomain page

  8. #38
    Maximum Bitrate
    Join Date
    Apr 2006
    Location
    Sydney, Australia
    Posts
    570
    Quote Originally Posted by Red GTi VR6 View Post
    added Kosti!

    Thanks again!

    Your welcome champ.

    I think this is a great board, just waiting for someone to review it
    New Car PC Build list in progress

  9. #39
    Newbie
    Join Date
    Jul 2006
    Location
    pennsylvania
    Posts
    11

    Itox 5C100-N-G

    A Rep named Leo from Itox informed me via email that the board will NOT support core 2 Duo, which I find a little hard to believe. That and the fact that the board is listed at $450 on their website takes the board out of consideration for me. Too bad, looked like a nice board.


    Jim ([email protected])

  10. #40
    Newbie
    Join Date
    Sep 2006
    Posts
    1

    Kontron Contact

    I'm sorry to hear that one of our sale team hasn't been in touch.

    If you call us at 888.294.4558, a member of the Sales team will assist you immediately. Please bear in mind we are on the west coast.


    Thanks,
    Kontron

Similar Threads

  1. FAQ: Installing a Mac Mini in Your Car
    By Bugbyte in forum The FAQ Emporium
    Replies: 20
    Last Post: 06-11-2011, 08:12 PM
  2. MINI atx or Itx
    By JDTUNER in forum General Hardware Discussion
    Replies: 1
    Last Post: 06-01-2005, 10:31 PM
  3. What is the most popular mini itx board
    By buzzby in forum General Hardware Discussion
    Replies: 6
    Last Post: 05-14-2005, 04:59 AM
  4. FS: Mini ITX Computer and 7" Touch screen LCD
    By breaker021 in forum Classified Archive
    Replies: 9
    Last Post: 04-28-2005, 08:22 AM
  5. Mini ITX in car stereo?
    By ljstevens in forum Newbie
    Replies: 11
    Last Post: 11-26-2004, 10:56 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •