What voltage problem... oh ok. See cold start Jetway thread below:
Fix for M2-ATX and Jetway!
got in contact with jetways as this is mostly the jetway board being fussy on its voltage, and the board can be fixed by...
1. remove R154/ E01-63A4.7K-F
2. replace RNB14/ E02-D680-8-F to E02-D470-8-F
this means nothing to me! does anyone understand??
if replacing C35 does not work, which im going to get done today i will probably RMA my board as they said i can do that if i dont know how to do the above, so looks like the problem is fixed!
PPI PC4100, PPI PC2350
Testing new board (Albatron KI690-AM2)
"I dont know if complaints were filed, or mistakes were made, but feelings were hurt." -Krystal Washington
...I love the French language...especially to curse with...Nom de Dieu de putain de bordel de merde de saloperies de connards d'enculés de ta mère. You see, it's like wiping your *** with silk, I love it.
Looks like it means the following to me...
But as Wiredwrx says, if you have to ask, don't even try. These things are tiny.
Old Systems retired due to new car
New system at design/prototype stage on BeagleBoard.
So what's the other alternative? Send it back to Jetway for upgrade? I'm stuck with this board now, seems kinda wasteful to just toss it. My board doesn't post when first fired up. Jumping the reset pins restarts it. But then it gets the CMOS checksum error - and my BIOS is reset to defaults. And of course it stalls waiting for F1 "to continue". Hapens every time like clockwork. Anyone else experiencing this? Does this sound like the Jetway-M2 problem others are having?
I've been having this problem ever since I got this MB back in Nov. I didn't think I could do anything about it. So you guys sending it back to Jetway to get it fixed?
Seems like such a stupid problem to have. Jetway seems to be a popular option now adays, except for this glitch. I sent Jetway and mitxpc (my retailer) an e-mail concerning the issue. No response yet.