Results 1 to 10 of 10

Thread: Via Epia MII12000 Blown Part

  1. 02-04-2007, 05:48 PM #1
    fugue
    fugue is offline
    Newbie
    Join Date
    Apr 2005
    Location
    Dallas
    Posts
    6

    Via Epia MII12000 Blown Part

    Hi there. While working on the case to my computer, I committed a thinking error. Consequently, when I applied power to my computer, the magic smoke come out of some SOT-23 part (which is the opposite of the desired effect). However, when I tried to look at the part under a microscope to see what it was to try to replace it (after attempting to repair my other board), the magic smoke that previously made it work basically fried the top part off whilst escaping.

    Here's the location of the part in jpeg form:


    I'd really appreciate it if someone could help me out and identify what part this is. All of the markings on top would be nice. I intend to replace it (I have the tools at work). It is, after all, cheaper to do that then buy an new motherboard. I know it's a little 6 pin SOT-23, but other than that, I have no idea.

    Also, please excuse the sheer slowness of the connection to the server with the picture and the fuzziness. I couldn't find my digital camera, so I used my phones. It's not the best.

    Thanks!

    -Fugue
    Reply With Quote Reply With Quote
  2. 02-07-2007, 11:05 AM #2
    fugue
    fugue is offline
    Newbie
    Join Date
    Apr 2005
    Location
    Dallas
    Posts
    6

    Unhappy Please?

    No one has an Epia MII that they can take a magnifying glass to? I just need a part number (and orientation preferably). If you don't feel like it, but have digital camera, take a (non-fuzzy unlike mine) picture.

    Perhaps I should use broken English. That seems to get the job done a little better.

    Hai2u!!4threve

    Mai computah brok. I hukd'd up 2 teh pwr in mi car wrong. I have awesum car! Gets fast on intrstat - 2 fast 4 cops!!!nine I hav 1 problem thugh: I fried mombord part on axident. OOPS LAULS!!!

    I ned taht prt. I hav toolz at wurk and qwick fingrz! I wuld lik to by form dijikey or micer teh right prt. $5 for prt and ups < $200 4 new mombordd.

    PLZ HELPZ!!!!!!!!!43 I NED TIHS! I WNT "PUTR IN MAH CAR@

    I WIL R3WRD! U LIK HUGZ?!?!?

    -fugue (ROFFLE)
    Reply With Quote Reply With Quote
  3. 02-07-2007, 11:11 AM #3
    2k1Toaster
    2k1Toaster is offline
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    9,851
    Send a message via AIM to 2k1Toaster Send a message via MSN to 2k1Toaster


    That sure did make me laugh, but I don't have a MII. Free bump though!
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store
    Reply With Quote Reply With Quote
  4. 02-07-2007, 11:37 AM #4
    strohj
    strohj is offline
    FLAC strohj's Avatar
    Join Date
    Aug 2004
    Location
    Pearland
    Posts
    1,345
    Send a message via MSN to strohj Send a message via Yahoo to strohj
    I have a broken MII1200 I will try to remember to look at this tonight and let you know...

    also since you have the means to fix them... can I possibly send you mine.. it has one part "without smoke in it" on the bottom that needs replacing...

    I am willing to pay for the fix...
    Pentium 4m 1.5GHz|MB896|Roadie Extreme|XM-Direct|Rikaline 6010|T-View 7"|Streetdeck|160gb Western Digital|1Gb DDR2-533 Ram
    Reply With Quote Reply With Quote
  5. 02-07-2007, 02:50 PM #5
    fugue
    fugue is offline
    Newbie
    Join Date
    Apr 2005
    Location
    Dallas
    Posts
    6
    I'm going to say probably although I'd rather not say "yes" without having looked at what part and what is wrong with it (if traces are also pulled up, etc.). As far as I am concerned I don't mind, I'm only limited by time, parts, and the hope that the broken part is not a BGA or some other unfixable part.

    The way I think it will work out the best is this: you buy the parts, ship it to me with the parts in the box. If you need me to look up the parts on my board, I can do that too. I fix it, ship it back with the money you've supplied for shipping.

    But of course, we can work out the details through PM/AIM, etc.

    Let me know what you think.

    -fugue
    Reply With Quote Reply With Quote
  6. 02-08-2007, 02:53 AM #6
    guizai
    guizai is offline
    Variable Bitrate
    Join Date
    Feb 2006
    Location
    Vancouver, BC
    Posts
    369
    hmm, looks like the MII10000 and the MII12000 have different board designs. Here's a pic I snapped, guess it's not going to help
    Reply With Quote Reply With Quote
  7. 02-09-2007, 12:40 AM #7
    fugue
    fugue is offline
    Newbie
    Join Date
    Apr 2005
    Location
    Dallas
    Posts
    6
    Not to look a gift horse in the mouth, but that's not the part I'm looking for. Thank you for the quite clear picture, but it's the wrong side. The part that's blown is kind of in between the ATX power connector and the stacked PS/2 mouse and keyboard jacks. It's off of the corner from an imaginary line drawn between the corner of the power connector and the corner of the VGA and RS-232 stacked connector.

    Thanks for the beautiful picture of the low power dual op amp though! It's beautiful!
    Reply With Quote Reply With Quote
  8. 02-09-2007, 12:51 AM #8
    2k1Toaster
    2k1Toaster is offline
    Fusion Brain Creator 2k1Toaster's Avatar
    Join Date
    Mar 2006
    Location
    Colorado, but Canadian!
    Posts
    9,851
    Send a message via AIM to 2k1Toaster Send a message via MSN to 2k1Toaster
    Admiring the surface mount components?

    It does look nice. Oooooooh, aaahhhhhhh.
    Fusion Brain Version 6 Released!
    1.9in x 2.9in -- 47mm x 73mm
    30 Digital Outputs -- Directly drive a relay
    15 Analogue Inputs -- Read sensors like temperature, light, distance, acceleration, and more
    Buy now in the MP3Car.com Store
    Reply With Quote Reply With Quote
  9. 02-09-2007, 12:52 AM #9
    eugene81
    eugene81 is offline
    Newbie
    Join Date
    Jan 2007
    Posts
    30
    looks like it says
    642J on it...
    buddy

    and look what i have for u!!!
    pictures.... good *** lookin pictures...




    Reply With Quote Reply With Quote
  10. 02-13-2007, 07:48 AM #10
    eugene81
    eugene81 is offline
    Newbie
    Join Date
    Jan 2007
    Posts
    30
    did it help or what?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. MII12000 vs SP13000
    By spaceskater in forum General Hardware Discussion
    Replies: 1
    Last Post: 03-07-2006, 11:19 PM
  2. Normal AMD/Intel system or VIA Epia system??
    By ironic in forum General Hardware Discussion
    Replies: 5
    Last Post: 12-08-2005, 08:07 AM
  3. WTB: VIA EPIA MII12000 or VIA EPIA SP13000
    By kickercivic1 in forum Classified Archive
    Replies: 0
    Last Post: 08-28-2005, 12:29 PM
  4. Patch: Linux 2.6.11.6 on Epia
    By rubicon in forum Linux
    Replies: 0
    Last Post: 04-06-2005, 11:25 PM
  5. Epia M and Epia 800 differences
    By wysiwyg in forum General Hardware Discussion
    Replies: 6
    Last Post: 12-20-2002, 11:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules