Ipod in Classic Car with no headunit. RCA out and charging power required
I am new to the forum and hope someone can help me with my current project.
I am creating a hidden MP3 stereo system in a British 60s classic car which for appearance does not include a working head unit. I have purchased 12v stereo amp with volume control and RCA input facility. This will be installed inside an old 60s Motorola MW/LW radio using its front panel volume and on/off control only. I have RCA power in to the stereo amp and will have switched 12V power out.
My question is I need to link in an IPod to the amp and power (charge it) it in the simplest and most economical way. The I Pod will need to be charged and if possible switched off and on with the 12V switched feed and I will need Audio out at line level out of the single I Pod docking connector. I can re-terminate any wires from the Ipod connector.
I have looked at using a Dension cable but they could not help me so my approach now is to use a Alpine KCE-422i cable (much cheaper) to connect to the IPod how do I then get Audio out and power in to the D shaped plug?, does anyone have a pin out for these connectors so I can take off the D shaped plud and reterminate or know of an interface cable to the D shaped plug with the ends I require.