HELP!! With ScanDo 800 harness wiring!!
I know there are only a handful of people using one of these ScanDo 800 converters or "RGB converter" but hopefully someone just familiar with VGA can help me out here!
I bought a ScanDo 800 without the video input cord which happens to have a unique pinout configuration so I cannot just feed it with a standard HD-15 VGA connector. I have the manual printed and I have scanned the relevant pages for reference below. It appears that I need to take the VGA from the computer (HD-15) and wire the this to the wider (DB-15) input on the ScanDo. From the manual I tried to match the pinouts the best I could (see diagram). I have my harness/adapter all soldered up according to my diagram but no luck getting the computer to display through the ScanDo :(. The Scando appears to be working because I can run a test on the video and it display properly on the TV, I just don't have a usable video signal from the computer
Anyone familiar with the ScanDo that might be able to help me out? Or anyone familiar with VGA might be able to help me out too.
(P.S. most people don't use the tern HD-15 they just call the standard VGA a DB-15 but technically the DB-15 is the older/wider 15 pin connector)