I'll check but I think mine only ever reads 1-5 when driving when I tested it. I'd say it is down to your antenna / aerial setup as you have basically connected both DAB and FM to the same connector. It really needs multiplexing.
I have a question when it comes to DAB/DAB+ radio, is it normal to have some signal errors when driving? When I'm standing still I have 0 in lost bytes but when I drive I have between 0 to up to 20 bits lost in the info window. I don't hear this lost bytes so it is no problem. Just wonder if it's normal or not.
I will have a word with Mitch about this. We solved this in our Centrafuse and standalone software a while back.
For the moment when I start my PC, RideRunner is loaded but the venice7 module failing to load. I have to exit riderunner and start it again. I guess this has something to do with the usb/serial software is not loaded fast enough in the startup and I have to delay the startup of Riderunner some seconds in some way to get it to work.
Are you using a 3.5mm audio cable with ferrities? This solved it for me.
The second problem is that I have very smal amount of disturbance. This is hardly notice when I have the volume on the venice7 module on maximum. But if I lower it to half I can hear it. This is something to do with some ground loops or something from the antenn ground. I will have to trouble shoot my ground. When I remove the connector between my soundcard and the radio modul it stops.