Method that works 100%!!!
Originally Posted by proerettic
TUTORIAL WORKS 100%!!! A user called Kenneth did this. Found it in the issue section!
JUST BEFORE DOING THIS... DELETE ALL THE DRIVERS MANUALLY IN THE DEVICE MANAGER... RIGHTMOUSE (DELETE DRIVER -> UNINSTALL? YES in the checkbox)
I HAD THE SAME PROBS AS YOU AND NOW IT'S WORKING!!! :lock1::lock1::lock1::lock1::lock1::lock1::lock1:: lock1:
Heres what i did i was having the same problem and i solved it heres how. 1.I unplugged the controller 2.uninstalled all the chatpad drivers 3.plugged the controller in one of my pc's back usb ports 4.went to device manager and updated my normal controller drivers( if the controller updated the drivers automatically its best to check but you should be ok) 5.restart and do the f8 driver check disable 6.install AMD64 chatpad drivers and wait for it to finish(if you get the pop ups asking about drivers click install anyway) 7.once the drivers have installed restart the pc and do the f8 disable again 8. now unplug the controller and plug it right back into the same usb port 9.run the normal win7 amd64 test 3.exe and the command prompt should open and stay open 10.once the command prompt finishes it will be open so press a couple buttons to see if they light up this works 100% of the time for me although it took me awhile to figure it out also im on win7 64bit too if it doesnt work retrace your steps because i just typed this entire message from my chatpad hope this helps good luck