Hacking a remote control into a car steering wheel controls
I don't have any experience in this but I thought I would give it a go as it seems the cheapest option. I'm wondering if anyone has done this before and can lend me some advice. I've pulled the cars stereo remote apart and I'm wondering If I can drill a small hole onto each side of the button pad's circuit and solder a wire on either side, and add a button in between to complete the circuit. I haven't pulled the steering controls apart yet. I'm wondering what type of button would be suitable for the steering wheel controls, it would need to complete the circuit once pushed then open after letting go so as to not drain the remotes battery. Also is it stupid to try and mount it inside the steering wheel. I'll post some pics tomorrow when I get the chance.